Search: Posts Made By: stevie3x
Showing results 1 to 25 of 200
Search took 0.08 seconds.
04-06-09, 08:11 PM
Replies: 1
Views: 994
Posted By stevie3x

check with your plasterer first, most in our...

check with your plasterer first, most in our area want to wait 30 plus days .

steve
11-21-08, 07:10 PM
Replies: 6
Views: 5,994
Posted By stevie3x

go to 2 " when you consider the length of the run...

go to 2 " when you consider the length of the run to & from the collectors, the heigth to the collectors, and all fittings , all this is refered to as restrictions to flow ,

you may need to...
11-21-08, 07:02 PM
Replies: 1
Views: 12,249
Posted By stevie3x

you can do ityourself and expect great results, ...

you can do ityourself and expect great results, first cleanout the old joint good a shop vac is good for this, the joint should be apx as deep as it is wide remember to initially make it a little...
11-21-08, 06:44 PM
Replies: 7
Views: 1,029
Posted By stevie3x

hayward is a good choice, 60 sq. ft. d.e. with...

hayward is a good choice, 60 sq. ft. d.e. with push / pull backwash valve you will need to acertain if you have proper disposal for the d.e. normally plumbed to sewer , NOT a septic tank, check with...
10-23-08, 10:27 AM
Replies: 4
Views: 2,440
Posted By stevie3x

the easytouch part # 520544 0r 520545 along...

the easytouch part # 520544 0r 520545 along with 2 actuators,

both have the built in power center for the chlorine generating & includes the cell, & probably cheaper than buying it piece by...
10-22-08, 06:34 PM
Replies: 2
Views: 1,034
Posted By stevie3x

intermatic makes the unit you need and is...

intermatic makes the unit you need and is available in an out door rain proof plastic enclosure.

steve
10-22-08, 06:30 PM
Replies: 4
Views: 2,440
Posted By stevie3x

the unit you bought is the bare bones unit...

the unit you bought is the bare bones unit meaning,

1. you do not get an in house control , comonally called icp

2. you did not get the power center for the intellichlor

3. and unless...
10-16-08, 07:01 PM
Replies: 1
Views: 886
Posted By stevie3x

a little olive oil, garlic, bake @ 350 mmmmm ...

a little olive oil, garlic, bake @ 350 mmmmm gud


actually there probably too small for that,

steve
10-14-08, 06:21 PM
Replies: 2
Views: 1,962
Posted By stevie3x

T S P tri sodium phosphate , an alakaline...

T S P tri sodium phosphate , an alakaline cleaner, you can buy at most paint stores

steve
10-14-08, 06:17 PM
Replies: 2
Views: 944
Posted By stevie3x

sounds like yo have too much suction, try...

sounds like yo have too much suction, try adjusting it where it moves , but does not race around, and also follow todrut's advise

steve
10-14-08, 06:13 PM
Replies: 4
Views: 1,062
Posted By stevie3x

there is absolutely no difference, only the...

there is absolutely no difference, only the packaging, dosage. etc. you have to be precise in your chemistry, as a very small amount goes a long way, not knowing the size of your spa you probably...
10-04-08, 04:11 PM
Replies: 4
Views: 1,405
Posted By stevie3x

don't be suprised if the gas valve needs to be...

don't be suprised if the gas valve needs to be replaced & depending on how wet / high the water actually got the thermistat may need replacing,.... all very expensive parts.


steve
10-04-08, 04:05 PM
Replies: 3
Views: 10,662
Posted By stevie3x

facing towards the water , the hole closest to...

facing towards the water , the hole closest to you goes to the pool pump , the other hole is plumbed to the bottom suction, [ eroneously refered to as main drain ] the only way water is pulled...
09-08-08, 04:11 PM
Replies: 2
Views: 896
Posted By stevie3x

how many circuits do you have ? each piece of...

how many circuits do you have ? each piece of equipment is considered as 1 circuit , example. ..... if you had 2 pumps & 1 pool light you would have a total of 3 circuits that you need to...
09-08-08, 04:02 PM
Replies: 1
Views: 910
Posted By stevie3x

either way would work, I would suggest pulling...

either way would work, I would suggest pulling permits from your building dept., they should have plans for you to follow, steel normally is 12 " on center both verticle & horizontal, and again 6...
07-29-08, 08:27 PM
Replies: 5
Views: 1,057
Posted By stevie3x

there are so many different, variables in place...

there are so many different, variables in place here, the size of piping, the number & kind of fittings, the distance to the pool from the filter / pump, is water being pumped uphill, different...
07-22-08, 04:13 PM
Replies: 2
Views: 1,407
Posted By stevie3x

ive seen cells that last 10 yrs. & price depends...

ive seen cells that last 10 yrs. & price depends on the brand,
longivity depends on, many factors, such as how long you run your pool circ. pump, how high a setting you have it on, how strong the...
07-21-08, 09:10 PM
Replies: 1
Views: 1,645
Posted By stevie3x

take it out by the control at the equipment & try...

take it out by the control at the equipment & try it, be patient as it takes apx. 1 minute or longer to go through its start up procedure. if it doesn't come on, new batt installed correctly, you...
07-21-08, 09:06 PM
Replies: 1
Views: 1,084
Posted By stevie3x

may be loose / corroded connection , if you live...

may be loose / corroded connection , if you live close to the ocean or experience high humidity this may cause your problem, remove the control from the wall pull the connector off the back , it...
07-15-08, 04:41 PM
Replies: 3
Views: 1,518
Posted By stevie3x

sounds like it was installed backwards , or...

sounds like it was installed backwards , or there is too much flow what hp pump do you have ?
look on the side of the flow switch there will be an arrow , it should point in the direction the...
07-14-08, 09:47 PM
Replies: 11
Views: 1,066
Posted By stevie3x

todrut gave you good advise, the jacuzzi brand...

todrut gave you good advise, the jacuzzi brand of pumps left a lot to be desired, they are now out of business, go with a good quality pump, such as pentair whisperflow, you can generally down...
Replies: 2
Views: 899
Posted By stevie3x

garbage disposal

what is the recommended / best way to sharpen the blades in a garbage disposal ? ive heard of glass and als ice , ? ?


steve
07-12-08, 01:39 PM
Replies: 6
Views: 8,737
Posted By stevie3x

do yourself a favor , & save yourself many...

do yourself a favor , & save yourself many headaches, buy a 4 in one test kit. there are directions inside that tell you how to figure your total gallons & how much acid to add, as well as any...
07-09-08, 07:24 AM
Replies: 4
Views: 6,863
Posted By stevie3x

replacing a jet in a gunite spa is not the kind...

replacing a jet in a gunite spa is not the kind of job i would suggest for a diy , however all things are possible depending on the individules ability,

that said replacing one jet only, is a...
07-05-08, 11:50 AM
Replies: 2
Views: 2,055
Posted By stevie3x

sounds like the hot surface igniter, located just...

sounds like the hot surface igniter, located just above the burners in the middle, has 2 white wires coumming from it, with the system off , follow the wires up to the 2 female / male connectors , ...
Showing results 1 to 25 of 200
 


 
Forum Jump