Search: Posts Made By: pepe1686
Showing results 1 to 14 of 14
Search took 0.01 seconds.
Replies: 34
Views: 11,642
Posted By pepe1686

Ok I can do that. Thanks for all your help,it is...

Ok I can do that. Thanks for all your help,it is greatly appriciated
Replies: 34
Views: 11,642
Posted By pepe1686

I don't have any tool to check the air change on...

I don't have any tool to check the air change on the expansion tank.
Replies: 34
Views: 11,642
Posted By pepe1686

You were right, the pump is not bronze it was...

You were right, the pump is not bronze it was just painted that color. The parts number for all 3 parts are the same as the cast iron (motor, bearing assembly). I ordered a taco 007 for 1 third of...
Replies: 34
Views: 11,642
Posted By pepe1686

The B&G series 100 does not have capacitor, just...

The B&G series 100 does not have capacitor, just a centrifugar switch inside, it is a very old disign.
Replies: 34
Views: 11,642
Posted By pepe1686

I don't know if it is just the paint or it really...

I don't know if it is just the paint or it really bronze, but according to what I see on the net that is the gold is the color fro the bonze one. As far as I can see none of this pump are use for...
Replies: 34
Views: 11,642
Posted By pepe1686

Gilmorrie, I appriciate all the help you have...

Gilmorrie, I appriciate all the help you have giving me but you are missing the point. I have a two-zone system (pic above) with two B&G series 100 circulating pumps. One went bad and with the help I...
Replies: 34
Views: 11,642
Posted By pepe1686

Both the motor and the bearing assenbly are well...

Both the motor and the bearing assenbly are well lubricated and both turns smoothly by hand. I took the good motor from the other pump and connected the the bearing assembly and it work fine, so I...
Replies: 34
Views: 11,642
Posted By pepe1686

It is put together the way is was, I labeled and...

It is put together the way is was, I labeled and took pictures to make sure it was put together right. The randomness has gone away, I spun it counter-clockwise and then applied eletricity while it...
Replies: 34
Views: 11,642
Posted By pepe1686

You Have been very helpful. I opened the motor...

You Have been very helpful. I opened the motor and gave it a good cleaning. Now it starts w/o help but at random direction. Sometimes starts clockwise, other times counter-clockwise; it needs to...
Replies: 34
Views: 11,642
Posted By pepe1686

I removed the motor again as sujested; if I give...

I removed the motor again as sujested; if I give it a spins it takes off. It sound a little rough at the back, like a scrassing noise. I let it run for about 10 minute but it still does not starts...
Replies: 34
Views: 11,642
Posted By pepe1686

Post I'll try your subjections. I don't know why it...

I'll try your subjections. I don't know why it has a bronze pump, I turn the system off for the summer and I have no problem with the water supply so I know it's not being used to recirculate water...
Replies: 34
Views: 11,642
Posted By pepe1686

I separated the motor from the bearing assembly...

I separated the motor from the bearing assembly and coupler (removed the 4 screws). I applied electricity to the motor and it does not turns. The coupler looks fine and the bearing assembly turns...
Replies: 34
Views: 11,642
Posted By pepe1686

It is the motor, I took it out and tested it; it...

It is the motor, I took it out and tested it; it does not starts(does not turns) it just hums. Thanks for all your help. In term of using another pump, I don't know if I have to worry about in what...
Replies: 34
Views: 11,642
Posted By pepe1686

Post Problem with Bell & Gossett series 100 Pump

I have a small 4 bedroom two floors house with a Peerless gas boiler. It has two B&G 100 pump one cast iron the other one is bronze body. the bronze seem to be difective, the motor just hums but it...
Showing results 1 to 14 of 14


 
Forum Jump