Search: Posts Made By: scrollmaster
Showing results 1 to 25 of 158
Search took 0.02 seconds.
Replies: 1
Views: 1,437
Posted By scrollmaster

Cannot remove bathroom set screw in handles

Delta Roman I think 2001 faucet for jacuzzi tub. Hot water set screw corroded in and cannot remove. I've tried PB Blaster to see if it would penetrate and loosen but after 5 sprayings over last...
02-13-09, 05:52 PM
Replies: 4
Views: 1,127
Posted By scrollmaster

Permit not required way out where I live but the...

Permit not required way out where I live but the LP gas company will do their own pressure check before delivery on any new service or interrupted service. I've always run my own gas and water line...
02-11-09, 05:43 PM
Replies: 4
Views: 1,127
Posted By scrollmaster

Just didn't want to take a chance so stopped by...

Just didn't want to take a chance so stopped by supply house and picked up another compression ring and put it together. I pumped 50lb and has held for a bit over 30 minutes so far but will keep it...
02-10-09, 06:20 PM
Replies: 4
Views: 1,127
Posted By scrollmaster

Attaching meter riser ?

I have 3/4 inch yellow pe pipe I put in for gas and attached the meter riser. My question is how tight do I turn this large nut on the compression joint. I got it real tight using pipe wrench but...
01-31-09, 04:21 PM
Replies: 5
Views: 18,809
Posted By scrollmaster

I went with the roll poly and a couple of 3/4"...

I went with the roll poly and a couple of 3/4" risers with compression fitting. Total cost $103 including tax. The 3/4"K Copper would have been $210 for 50ft roll and I would have needed 2 rolls so...
01-31-09, 06:44 AM
Replies: 5
Views: 18,809
Posted By scrollmaster

Hey guys, thanks for the replies and Mark believe...

Hey guys, thanks for the replies and Mark believe me the reason for this post is to find what is safe for gas usage. I was just looking for all the options available plus was wondering specifically...
01-30-09, 04:59 PM
Replies: 5
Views: 18,809
Posted By scrollmaster

100ft propane line question

I need to run 100 feet of line to connect my propane tank to generator and while I'm out in the country and will not be inspected I do want this to be done properly. The gas company said I need 5/8...
Replies: 8
Views: 1,818
Posted By scrollmaster

I'm wondering if possibly might be something with...

I'm wondering if possibly might be something with the inverter. I wonder if a wire may have developed a poor connection from the vibration of traveling. Undoing the generator from the platform is a...
Replies: 8
Views: 1,818
Posted By scrollmaster

RV Generator frequency question

I have a Kipor KGE3500Ti I use on my 5th wheel and haven't had any problems the 1 1/2 yrs been using it... BUT I took my digital multimeter and checked the voltage and frequency. Voltage right on...
Replies: 5
Views: 7,536
Posted By scrollmaster

One other thing. The shop I talked to also...

One other thing. The shop I talked to also suggested instead of 134a I go with Freeze12 and it would cool more like the original R12 that was in it. Will the green orings I have for 134a work with...
Replies: 5
Views: 7,536
Posted By scrollmaster

What I flushed with is Auto Air Conditioning...

What I flushed with is Auto Air Conditioning Flush & Clean by Interdynamics, just picked it off the shelf at O'Reilly Auto. What's in it I don't know, I'm looking at the can but it doesn't have...
Replies: 5
Views: 7,536
Posted By scrollmaster

AC Condenser flush problem

87 4Runner SR5 speed 4WD 22RE engine
Old R12 converted to 134a

Removed both lines from AC Condenser and poured in about 12 oz or so of the recommended flush A good amount of air is flushing out...
Replies: 2
Views: 1,701
Posted By scrollmaster

Working now

That got it. I removed the tail light assembly's and the ground wire on both was corroded really bad where it contacted the metal. I cut the wire back to fresh and sanded the corrosion away,...
Replies: 2
Views: 1,701
Posted By scrollmaster

5th wheel brake light problem

ALL travel trailer lights work fine with my truck headlights off. Everything on the trailer continues to work normally with truck headlights on except when I hit the vehicle brake the left and right...
Replies: 3
Views: 1,419
Posted By scrollmaster

I spent most of the day Sunday but finally got...

I spent most of the day Sunday but finally got it. There was a large pink wire that provided power to the power window circuit breaker in back of the fuse panel. If I pulled breaker the power windows...
Replies: 3
Views: 1,419
Posted By scrollmaster

Also let me add this. I didn't just arbitrarily...

Also let me add this. I didn't just arbitrarily replace ignition switch and lockset just to see if this was the problem. My daughter has been having to "wiggle and position" the key in the run...
Replies: 3
Views: 1,419
Posted By scrollmaster

91 Mustang Ignition stays hot

91 Mustang LX Hatchback 2.3L

Starting last week the power windows, wipers & radio keep working even with key off and removed. Cigarette lighter & power mirrors also work with ignition off but I...
Replies: 6
Views: 897
Posted By scrollmaster

It was an electrical problem. The power wire on...

It was an electrical problem. The power wire on the clutch had somehow broken way up by the wheel well where it come out of the harness. Then broken end at the harness stayed up top but the other...
Replies: 12
Views: 3,520
Posted By scrollmaster

Was something like $77 - $78 plus tax at Sams if...

Was something like $77 - $78 plus tax at Sams if I remember right. Much cheaper than by the can.
Replies: 12
Views: 3,520
Posted By scrollmaster

Should I shake the can a bit before charging or...

Should I shake the can a bit before charging or does that matter?
Replies: 6
Views: 897
Posted By scrollmaster

Hey Mark, I checked the compressor and it is not...

Hey Mark, I checked the compressor and it is not kicking in at all. If it matters the clutch turns freely by hand. Borrowed a UV light and glasses from a bud of mine and injected some dye but...
Replies: 12
Views: 3,520
Posted By scrollmaster

I understand but when you have this many used...

I understand but when you have this many used vehicles to keep up and have three of your four kids left in college it's the path of least financial resistance to add a bit of coolant each year to the...
Replies: 6
Views: 897
Posted By scrollmaster

Hey Mark. I purchased the vehicle around 94 or...

Hey Mark. I purchased the vehicle around 94 or 95 and the coversion had already been done so I'm just not sure what to tell you about what was replaced. I'm not even sure if the orings were...
Replies: 6
Views: 897
Posted By scrollmaster

AC Hi & Low side same

87 4Runner SR5 4WD 22 RE engine
Was converted from R12 to 134a number of years ago.

Hi & low side both measure the same. The other day when engine was opertating temp and outside temp was close...
Replies: 12
Views: 3,520
Posted By scrollmaster

Have 7 vehicles at home and 30lb from Sams way...

Have 7 vehicles at home and 30lb from Sams way cheaper than by the can.
Showing results 1 to 25 of 158
 


 
Forum Jump