Search: Posts Made By: dreamen
Showing results 1 to 25 of 66
Search took 0.02 seconds.
Replies: 4
Views: 94
Posted By dreamen

I do but not for a piston that small. Hose clamp...

I do but not for a piston that small. Hose clamp is a good idea will grease up the cylinder and clamp and give it a try
Replies: 4
Views: 94
Posted By dreamen

Echo Backpack Blower PB-265ln

Anyone have any handy tips on putting in new piston and ring back in cylinder? I already broke a new ring. :( Gets kinda expensive. Thanks for your help
Replies: 2
Views: 128
Posted By dreamen

Thanks for the info, yes it is a Red GX 8hp. ...

Thanks for the info, yes it is a Red GX 8hp. Nice engine, will do some research on the pump to see if it is a easy fix or?
Replies: 2
Views: 128
Posted By dreamen

North Star 3000psi Pressure Washer

Working on this pressure washer. It has a 8 HP Honda Engine. Replaced the carb and gas line. Started right up but it pulses? Like the governor revs then slows back and forth. Is this normal when...
Replies: 35
Views: 659
Posted By dreamen

Just an update on saw project. Got a used oil...

Just an update on saw project. Got a used oil pump on Ebay, put it on with some gasket sealer, put the saw back together and it took a bit of running to fill pump and pump oil to the bar. Did it...
Replies: 35
Views: 659
Posted By dreamen

Took the pump apart, and the plastic gear inside...

Took the pump apart, and the plastic gear inside the pump is stripped and would not turn. Just need to find a part and put everything back together
Replies: 35
Views: 659
Posted By dreamen

Anybody have any experience with the oiler system...

Anybody have any experience with the oiler system on this saw? Have checked the pump, gasket and the lines are good. My thoughts are the pump is bad. All the gears and everything are good. Have...
Replies: 35
Views: 659
Posted By dreamen

Wow, it Started! This is a learning experience. ...

Wow, it Started! This is a learning experience. The one picture below shows the contact spring on top of the choke switch shaft?? This was the way it was when I got the saw. My kids picked it up...
Replies: 6
Views: 211
Posted By dreamen

Could it be bad gas? I have had some ethanol gas...

Could it be bad gas? I have had some ethanol gas with water in it. I also do not use any ethanol gas in any small engines, my wheeler or my lawn tractor. Even with non oxy gas I still use stable...
Replies: 35
Views: 659
Posted By dreamen

Well it looks like the USPS lost the package with...

Well it looks like the USPS lost the package with the part in it. Was out for delivery on the 18th, but was not delivered?? They cannot find it?? This is so typical of my post office. If it does...
Replies: 35
Views: 659
Posted By dreamen

From what I can tell that spring hold the choke...

From what I can tell that spring hold the choke open or the flapper on the filter open. The choke lever I think is suppose push it shut. ? The part should be here tomorrow and will give it a try
Replies: 35
Views: 659
Posted By dreamen

This is a picture of the part from my machine,...

This is a picture of the part from my machine, the end that pushes on the filter choke lever is rounded over. Some of the ones on ebay looked exactly the same. I ordered one that has a square end. ...
Replies: 4
Views: 149
Posted By dreamen

Find a local small engine repair place or someone...

Find a local small engine repair place or someone that fixes small engines. Many of then have tons of old blowers you may find one that will work. Facebook marketplace is a good place to start. ...
Replies: 35
Views: 659
Posted By dreamen

When you look at the ones on ebay some end levers...

When you look at the ones on ebay some end levers that are suppose to move the choke on the filter are flat end and some ends are rounded? Mine is rounded. Will pull it out this morning and compare...
Replies: 35
Views: 659
Posted By dreamen

The link with the picture 4,12,5 all come with...

The link with the picture 4,12,5 all come with the filter. 14 does not show the lever on the end of the bar? That may be a newer saw. Even the filter only has one screw to hold in place as the...
Replies: 35
Views: 659
Posted By dreamen

Thanks for all the reply's. That filter is a new...

Thanks for all the reply's. That filter is a new china one and is junk. But it looks like the exact one I took off the saw but it needed to be replaced. Will get a new one once I get the saw...
Replies: 35
Views: 659
Posted By dreamen

Hope these pictures help. The choke lever does...

Hope these pictures help. The choke lever does not even touch the lever on the filter. Not sure why. This is the way it was when I got this saw as a project. Any Suggestions?

111638

111639
...
Replies: 6
Views: 249
Posted By dreamen

How do you adjust the valves on this engine? Is...

How do you adjust the valves on this engine? Is it easy to do? I am having the same problem with a Twin Briggs
Replies: 35
Views: 659
Posted By dreamen

Trying to post pictures but the site will not let...

Trying to post pictures but the site will not let me because I have posted others and says I am out of storage? How do I delete other pictures?
Replies: 35
Views: 659
Posted By dreamen

The choke lever does not even touch the lever on...

The choke lever does not even touch the lever on the air filter. Nothing seems to be broken? Looked at another lever and they look the same as the one I have??
Replies: 35
Views: 659
Posted By dreamen

Thanks for the reply's I am at 1 1/2 turns on...

Thanks for the reply's I am at 1 1/2 turns on the jets. I did line up the holes on the gaskets. I will pull the gas supply line as I have a new one and will put it on with new filter and give that...
Replies: 35
Views: 659
Posted By dreamen

In doing the google search, talks about the air...

In doing the google search, talks about the air cleaner. There is a lever on it that closes and is suppose to close with the choke button but it does not??? Just does not move that at all
Replies: 35
Views: 659
Posted By dreamen

I did put on new carb, fuel lines look good. ...

I did put on new carb, fuel lines look good. There is no way to reverse fuel lines on this machine. I blew air thru the fuel filter line and filter looks like new. The line that comes off back of...
Replies: 35
Views: 659
Posted By dreamen

Stihl 028 Wood Boss Chainsaw

This is an older saw. I am missing something just checking to see if anyone has any ideas. I replaced the carb, it will fire with starting fluid but does not seem to be getting gas to run. Two...
Replies: 2
Views: 137
Posted By dreamen

Great Thanks, it currently is about 3 times that.

Great Thanks, it currently is about 3 times that.
Showing results 1 to 25 of 66
 


 
Forum Jump