Search: Posts Made By: RobDelaney
Showing results 1 to 25 of 48
Search took 0.03 seconds.
Replies: 13
Views: 1,329
Posted By RobDelaney

how much is a Reillo burner package vs the...

how much is a Reillo burner package vs the Beckett? I found Beckett with a control for around $375
Replies: 13
Views: 1,329
Posted By RobDelaney

ok so overnight and no leak but when the power...

ok so overnight and no leak but when the power vent finishes its post purge a little white smoke comes out of the shutter openings and continues until the boiler cools it was more during the leak now...
Replies: 13
Views: 1,329
Posted By RobDelaney

its the little things

Okay so theres a flat sealing washer that goes on the nozzle port of the pump that I must have dropped upon disassembly to change fitting types from the old pump so no matter how hard I tightened it...
Replies: 13
Views: 1,329
Posted By RobDelaney

changed cordset lets see what happens.....

changed cordset lets see what happens.....
Replies: 13
Views: 1,329
Posted By RobDelaney

Fittings checked out. I am gonna do the nozzle...

Fittings checked out. I am gonna do the nozzle test like you said..... also I just read something interesting. On the install instructions it says that the delay timer is for primaries without a...
Replies: 13
Views: 1,329
Posted By RobDelaney

I wired everything just as it was prior. I guess...

I wired everything just as it was prior. I guess double check that the solenoid is working? Deadhead the nozzle port again with the gauge?
Replies: 13
Views: 1,329
Posted By RobDelaney

Fittings are all tight. Single pipe. And yes It...

Fittings are all tight. Single pipe. And yes It is a delay timer valve.
I dont understand the "wire on the primary part though"
The clean cut was direct replacement because the solenoid was stuck...
Replies: 13
Views: 1,329
Posted By RobDelaney

Blower- oil soaked

I had just replaced my transformer and clean cut oil pump and the boiler was working great until I found a oil leak. The inside of the blower chamber is coated in oil. Could this be a malfunctioning...
Replies: 9
Views: 1,179
Posted By RobDelaney

Success!

Replaced pump and trans. and poof saved 500 bucks and only took 2 hours.
While I had it apart I cleaned the squirrel cage, shutter and air band.
Follow up questions...
I have a Tjerlund power...
12-12-08, 04:59 PM
Replies: 14
Views: 936
Posted By RobDelaney

Any windows large enough for a full sheet. I...

Any windows large enough for a full sheet.
I dont know where you are located but most any supply house has a boom truck for rock delivery.
Here in eastern PA Trevdan building supply will drop and...
12-11-08, 06:11 PM
Replies: 14
Views: 936
Posted By RobDelaney

I agree with mark hang your drywall on the long...

I agree with mark hang your drywall on the long and try to use longer sheets and stagger vertical joints. I know 10 or 12's are hard to manuver but it is well worth it.
Replies: 9
Views: 1,179
Posted By RobDelaney

Is the pressure port below the nozzle port? Or...

Is the pressure port below the nozzle port?
Or is it one of the 2 ports on the bottom?
Replies: 9
Views: 1,179
Posted By RobDelaney

set up calls for 140 psi I found the pressure...

set up calls for 140 psi I found the pressure adjustment and bleeding is simple just how do I go about testing pressure?
Replies: 9
Views: 1,179
Posted By RobDelaney

when replacing a Beckett oil pump is there any...

when replacing a Beckett oil pump is there any settings or adjustments needed other than factory?
2184404GU pump
TD oil fired boiler
Also same question for transformer
51771GU transformer
I...
Replies: 9
Views: 1,179
Posted By RobDelaney

Burner and control Question

Is this the correct forum to ask a burner and control question for a oil fired boiler system?
12-11-08, 09:20 AM
Replies: 1
Views: 741
Posted By RobDelaney

Burner and control Question

Is this the correct place for a burner and control question installed on a hydronic system or in the boiler section?
Replies: 49
Views: 4,751
Posted By RobDelaney

:wall: I have heard this from many people here on...

:wall: I have heard this from many people here on other threads.
I got to tell you in the past three days I have learned alot.
You guys are great.
I started answering questions in Flooring and...
Replies: 12
Views: 3,963
Posted By RobDelaney

http://www.tjernlund.com/Tjernlund_8500005.pdf ...

http://www.tjernlund.com/Tjernlund_8500005.pdf
Here she is
Replies: 49
Views: 4,751
Posted By RobDelaney

sorry its also felt inners

sorry its also felt inners
Replies: 49
Views: 4,751
Posted By RobDelaney

whats a filter?................Just kidding its a...

whats a filter?................Just kidding its a Westwood and is located about 10 inches from the pump after the rise and drop.
For all intensive purposes the bottom of the tank is approx 6 inches...
Replies: 12
Views: 3,963
Posted By RobDelaney

Yes there is a 2 acessory interlock for just such...

Yes there is a 2 acessory interlock for just such a device.
I am not making this an air tight chamber but a little extra would help.
Replies: 6
Views: 819
Posted By RobDelaney

Do they sell a valve that is able to be actuated...

Do they sell a valve that is able to be actuated and controlled remotely? (Low voltage wired I mean)
Replies: 11
Views: 1,289
Posted By RobDelaney

Purchased the home with oil and got a new boiler...

Purchased the home with oil and got a new boiler (very long story) for free install and everything.
I have gas coming in and plan to use it for cooking and gas lamps outside.
I am planning on going...
Replies: 49
Views: 4,751
Posted By RobDelaney

You are exactly right. No bleeding required but...

You are exactly right. No bleeding required but it does take a little longer than normal to fire.
At the beginning of heat season I do have to bleed.
The leak must be almost microscopic:confused: ...
Replies: 6
Views: 819
Posted By RobDelaney

Yeah that was kind of my main thought of...

Yeah that was kind of my main thought of offsetting the electric bill and use a mixing valve.
Is that Taco programmable?
Showing results 1 to 25 of 48
 


 
Forum Jump