Search: Posts Made By: Roll Tide
Showing results 1 to 13 of 13
Search took 0.01 seconds.
Replies: 1
Views: 696
Posted By Roll Tide

Under cabinet lighting questions

I've been doing some looking around for the puck lights and can't find what I'm looking for. I want hard wired type puck lighting. I already have the plan layed out for running new wire and adding...
Replies: 3
Views: 1,390
Posted By Roll Tide

Get up on the roof and measure the length and...

Get up on the roof and measure the length and width. Multiply them and you have your area. One square of shingles covers 100sqft. I always allow 10% for waste and starter shingles.
Replies: 5
Views: 1,776
Posted By Roll Tide

Pulpo...I would go back to the paint that works...

Pulpo...I would go back to the paint that works but I've already bought all the paint.:(

Marksr...... Didn't know if thinning might help or not. It was stirred well. As soon as I got home from...
Replies: 5
Views: 1,776
Posted By Roll Tide

Valspar Ultra Premium

I used some Valspar to paint some textured walls and it didn't want to cover very well. I was using 3/8" roller and thought that was my problem. Switched to a 3/4" and still the same thing. It just...
Replies: 4
Views: 2,710
Posted By Roll Tide

I wanted to mount the receiver behind the tv but...

I wanted to mount the receiver behind the tv but I figured the remote would not work because of there would be no line of site between the receiver and the remote. I've heard of rf converters and...
Replies: 4
Views: 2,710
Posted By Roll Tide

Where to put satellite receiver?

I told the wife she could pick a new bedroom suit but I also wanted a flat panel tv to mount on the wall. My delima is what do I do with my satellite receiver? I had thought about cutting out the dry...
Replies: 3
Views: 2,127
Posted By Roll Tide

Nevermind! I found the problem. I checked each...

Nevermind! I found the problem. I checked each hot leg and one had no voltage on one and the other was 119v. Went outside to the breaker and one side was 119v and the other was 0. That's a lot better...
Replies: 3
Views: 2,127
Posted By Roll Tide

Frigidaire range not heating

I have a Frigidaire electric range model#FEFL77ABE. Last year while cooking Thanksgving dinner the breaker tripped. Reset breaker and no problems. My wife was cooking last night when the breaker...
01-31-07, 12:11 PM
Replies: 2
Views: 872
Posted By Roll Tide

I did find out that it is not the circuit board....

I did find out that it is not the circuit board. Robbed a board from a vacant house down the street. Same unit and board. Swapped the boards out and still no fix. I did take the other back and put it...
01-31-07, 09:58 AM
Replies: 2
Views: 872
Posted By Roll Tide

Bryant HP problems

Been having a nagging problem with my Bryant HP. Let me start from the beginning. Back in the summer of last year it would not come on at all. Sercive man came out and checked it out. He said it was...
12-09-06, 12:24 PM
Replies: 2
Views: 821
Posted By Roll Tide

HP compressor on and off

I have a Bryant Heat Pump and it seems to be doing something screwy. It's been in the mid twenties here at night and I had the t-stat set on 69-70. When it would reach that temperature and the unit...
Replies: 2
Views: 1,163
Posted By Roll Tide

Thanks for the info there Snoonyb! :thumbup:

Thanks for the info there Snoonyb! :thumbup:
Replies: 2
Views: 1,163
Posted By Roll Tide

rafter length

I'm building a 16' x 24' work shop and intend on putting up a hip roof. I'm stuck on measuring and cutting my rafters. Also I don't know how high the ridge board should be. It will be 7 on 12 pitch...
Showing results 1 to 13 of 13


 
Forum Jump