Search: Posts Made By: willkeeptrying
Showing results 1 to 25 of 136
Search took 0.05 seconds.
Replies: 2
Views: 183
Posted By willkeeptrying

I called several recommended appliance repair...

I called several recommended appliance repair people and they would not work on it. Some weren't familiar and one said the parts were discontinued. I have a tech coming who is familiar with the...
Replies: 2
Views: 121
Posted By willkeeptrying

Thanks for the info. After a day of this issue it...

Thanks for the info. After a day of this issue it seems to work fine now and the problem cleared up. I was concerned something got in the vent from the recent storm here in ny, and blocked the vent....
Replies: 2
Views: 121
Posted By willkeeptrying

Kitchen sink drains slow

My kitchen sink drains very slowly if it is filled with water. If I just run the sink straight down the drain, it goes fast. I think maybe it has something to do with air venting? I did snake it to...
Replies: 2
Views: 183
Posted By willkeeptrying

Dacor double oven broken again code u60 cooling fan

We have a dacor electric oven Model EO230SCH Serial# VF08320165 giving a u60 cooling fan code. Sounds like the cooling fan, again. We had it under contract since 2008 when we got it. Either the top...
Replies: 2
Views: 174
Posted By willkeeptrying

Thanks for the reply. I bought some flat screws...

Thanks for the reply. I bought some flat screws with big washers and will do these in addition. I got all the epoxy off the original ones and will reuse those as well. Using JB weld 2 part epoxy.
Replies: 2
Views: 174
Posted By willkeeptrying

Sink clips failed

I have a rectangular sink, 28" x 16", which is an under granite, installation, There was only 2 clips on each side. This morning, we saw that 2 had come away from the granite and either the granite...
08-19-19, 08:14 PM
Replies: 1
Views: 370
Posted By willkeeptrying

Pella sliding patio Door vent left

We had a 20 year old pella sliding glass patio door but due to water damage from the front glass glazing, it rotted out. We got a replacement Pella which was "vent left". The guy in the store said...
Replies: 4
Views: 488
Posted By willkeeptrying

When I got access to the bottom part I noticed...

When I got access to the bottom part I noticed the spring in the back didnít seem right. I adjusted it with a screw driver but not sure if I did anything. I also thought the washing machine cover...
Replies: 4
Views: 488
Posted By willkeeptrying

Noisy maytag

I saw it on the original users guide it called it the performa oversize capacity plus washer. I double checked and it says model number pav2300aww rev 12 serial number 12324259zm.
I will try to look...
Replies: 4
Views: 488
Posted By willkeeptrying

Noisy Maytag washer PAV 2300

After my wife washed a heavy bathroom rug, the washing machine squels loudly when spinning. It is also hard to turn manually and stops abruptly when I open the lid. I think it used to slowly stop. ...
06-25-18, 07:26 AM
Replies: 7
Views: 496
Posted By willkeeptrying

I replaced the guts of the diaphragm including...

I replaced the guts of the diaphragm including the new solenoid. All works perfectly now. Thank you all for your help.
06-13-18, 06:31 PM
Replies: 7
Views: 496
Posted By willkeeptrying

There was no power when I checked it and then...

There was no power when I checked it and then respliced wires and then did get power. Still didnít work so I got a new solonoid, I figured the old one burnt out if it got intermittent power.
New...
06-12-18, 08:21 PM
Replies: 7
Views: 496
Posted By willkeeptrying

One zone on sprinkler doesnít work

One of the zones on my six zone sprinkler system does not turn on automatically. I tried turning it on with the bleeder switch and it works. I also tried unscrewing the solonoid slightly and it...
Replies: 3
Views: 426
Posted By willkeeptrying

Garage door opener broken

Yes the weight is probably the problem since it is probably 40lbs with springs. It is 29 years old and I replaced gears 5 years ago. Motor does turn freely and I did inspect the board for anything...
Replies: 3
Views: 426
Posted By willkeeptrying

I replaced the capacitor thinking I was hearing...

I replaced the capacitor thinking I was hearing the motor try to start. It still does the same thing. Press the button and it sounds like it trys to start twice, then nothing. 2 quick hums and...
Replies: 6
Views: 540
Posted By willkeeptrying

Thank you Tony and Vermont. There was no O...

Thank you Tony and Vermont.
There was no O ring inside the oil cap. The new one came with one and maybe this caused him to over tighten it. Knowing him, he probably constantly tightened it, but...
Replies: 3
Views: 426
Posted By willkeeptrying

sears craftsmen garage door not working

My sears 1/2 hp chain type garage door stopped working. I took the chain off the sprocket, thinking it may have binded against something. I had this before. It still hummed. 2 short humms, when...
Replies: 6
Views: 540
Posted By willkeeptrying

Thank you Vermont and Tony T. for your feedback. ...

Thank you Vermont and Tony T. for your feedback. My neighbor probably did over tighten since the snow blower was stored in the attached garage. I will get some shear pins when I pick up the new...
Replies: 6
Views: 540
Posted By willkeeptrying

Sears snow blower 247.889571 oil filler tube broke

I use my neighbors snow blower and after the last time we used it, it seemed fine. It was thick ice we had to go through- 22 inches of ice boulders from the plows. When he went to run it out of gas,...
Replies: 4
Views: 473
Posted By willkeeptrying

I found all the missing parts except the actual...

I found all the missing parts except the actual round part that stops the water from draining. I think that part broke off behind the tub. There is no access. I tried fishing it out with a hanger...
Replies: 4
Views: 473
Posted By willkeeptrying

You may be correct that it is too small a...

You may be correct that it is too small a diameter. It did seem loose as it is lowered into the hole. It said it fits price pfiester. I will double check available sizes and also if it goes down...
Replies: 4
Views: 473
Posted By willkeeptrying

bath tub stopper not stopping water

My tenant's bath tub was completely missing the flip up bath tub stopper cover and what was behind it. Not sure why she would throw it out. I purchased a brass stopper which is shown. When I lower...
Replies: 8
Views: 1,334
Posted By willkeeptrying

thank you so much for your replies. Yes there is...

thank you so much for your replies. Yes there is dust inside the baseboard which I will take care of. It is the coldest day of the year, as you know, being in NJ. I will monitor it and see how it...
Replies: 8
Views: 1,334
Posted By willkeeptrying

I waited and the burner went off. at that point...

I waited and the burner went off. at that point the temperature was at 175 degrees. the house was not at the temperature on the thermostat and should not have turned off.
Replies: 8
Views: 1,334
Posted By willkeeptrying

150 and will check it in five minutes. burner...

150 and will check it in five minutes. burner kicked on.
Showing results 1 to 25 of 136
 


 
Forum Jump