Search: Posts Made By: kpaskow
Showing results 1 to 25 of 29
Search took 0.02 seconds.
Replies: 1
Views: 391
Posted By kpaskow

Does a 5898 RF motion sensor display LED's?

I have a new 5898 RF motion sensor and I've been unsuccessful getting it working. It only shows the trip LED's when in the 10 min test mode (after the cover has been removed).
1) Do the LED's...
Replies: 2
Views: 455
Posted By kpaskow

Thanks MrRonFL, You remember I was maxed out with...

Thanks MrRonFL, You remember I was maxed out with no available zones left. I freed up a few zones by deleting those used for an extra fob I can do without. I will have a look at the manual and try...
Replies: 2
Views: 455
Posted By kpaskow

Programming a 5898 Motion on a Vista 20SE

I'm having problems adding the S/N while programming a 5898 motion. If I use the self enroll the S/N that comes up on the display does not match the S/N on the Motion. If manually entering the S/N I...
Replies: 1
Views: 515
Posted By kpaskow

It's time to upgrade my alarm system

With my current hardware, a Vista 20se (clone) and a 5881ENM 16 wireless zone receiver;
1) I just maxed of wireless zones
2) I can't add the EYEZ-ON module

I'm considering upgrading my entire...
Replies: 7
Views: 1,289
Posted By kpaskow

Thanks for the conformation on the model numbers...

Thanks for the conformation on the model numbers and info. So in order to program in the motion detector I need to remove the 5804BD fob or the two 5827BD wireless keypads? Oh, and what about zone 9,...
Replies: 7
Views: 1,289
Posted By kpaskow

Here is the pic I posted a while back 76841

Here is the pic I posted a while back 76841
Replies: 7
Views: 1,289
Posted By kpaskow

Another thing to note is zones 10-18 are wireless...

Another thing to note is zones 10-18 are wireless sensors, zones 19, 20 and 22 are for the 5804BD fob and then zones 37-39 are for the 5827BD wireless keypads. I'm not sure why zone 21 and 23-36 were...
Replies: 7
Views: 1,289
Posted By kpaskow

I'm pretty sure it's a vista 20se and a 5881ENM....

I'm pretty sure it's a vista 20se and a 5881ENM. If you have access to my previous posts, I have pictures of it posted, I haven't been sure of exactly what the model numbers are.
Replies: 7
Views: 1,289
Posted By kpaskow

Error code E8

Hi,
I'm trying to add a wireless motion sensor 5898. When I tried to add it I got an error code E8. I think it means my receiver is maxed out and no more zones are available. I count 16 zones used...
Replies: 4
Views: 543
Posted By kpaskow

Makes sense. Thanks guys!

Makes sense. Thanks guys!
Replies: 4
Views: 543
Posted By kpaskow

Mounting the 5898 Dual-Tec Motion Detector

HI, Just got a new motion detector and am atempting to mount it in a corner. Why do the mounting instructions say to only use left OR right side corner mounting holes? Please see attached instruction...
Replies: 12
Views: 1,301
Posted By kpaskow

Mr Ron, Thank you for your help and insight on...

Mr Ron, Thank you for your help and insight on this. Is there another solution besides upgrading to the 20P if I want to be able to use all of my existing equipment: 2ea hard wired 6139 keypads, 5800...
Replies: 12
Views: 1,301
Posted By kpaskow

If it makes a difference the Vista 20se...

If it makes a difference the Vista 20se instructions say the default installer code is 4112, mine is 6321.
Replies: 12
Views: 1,301
Posted By kpaskow

Hi and thanks for yor reply. What makes the Vista...

Hi and thanks for yor reply. What makes the Vista 20se not compatible with the Eyez-On if it works with most other Vista panels?
Replies: 12
Views: 1,301
Posted By kpaskow

Vista panel ID

I hope these pix will help someone identify the panel along with the other pix (below) of the stickers on the IC's. And can someone explain how both of my keypads are addressed to 31 (when in press 1...
Replies: 12
Views: 1,301
Posted By kpaskow

Thanks Furd, I was hoping the stickers on the...

Thanks Furd, I was hoping the stickers on the IC's would indicate the exact panel.
Replies: 12
Views: 1,301
Posted By kpaskow

Here is a picture.

The keypad says Security Manager 2000 but that may not be an accurate way of knowing for sure. There are two keypads and both say 31 when keys 1 and 3 are held at the same time. There used to be two...
Replies: 12
Views: 1,301
Posted By kpaskow

And will the Eyez-On Envisalink EVL-4CG IP...

And will the Eyez-On Envisalink EVL-4CG IP Security Interface Module work with it?
Replies: 12
Views: 1,301
Posted By kpaskow

what vista alarm panel is this?

Hi,
Can anyone tell me what vista alarm panel is this? See attached pictures.
Thanks,
Ken

730647306573066
Replies: 9
Views: 724
Posted By kpaskow

It's an SLA and is connected in the alarm panel...

It's an SLA and is connected in the alarm panel box. The charger is part of that panel and is doing it's job. Just wondering if there is any (preventative maintenance) PM required. I guess not, just...
Replies: 9
Views: 724
Posted By kpaskow

Backup alarm battery

I've had my 12V (lead acid?) battery for many years. Does one need to cycle it for longevity like NiCd or NiMH?
Replies: 5
Views: 756
Posted By kpaskow

all set works like a charm!

all set works like a charm!
Replies: 5
Views: 756
Posted By kpaskow

Just received the new 4 wire smoke detectors and...

Just received the new 4 wire smoke detectors and am installing them now. The old smokes have plugs, the new has screw terminals. The old smoke has, two red (+power), two black (gnd), two purple and...
Replies: 5
Views: 756
Posted By kpaskow

do you recognize this fire/smoke detector?

I need to replace very old fire/smoke detectors but can't ID what I have. Can anyone recommend what I should get to replace these?

Pictures attached
Replies: 2
Views: 570
Posted By kpaskow

WiFi enabled keypad ?

I'm looking for a WiFi enabled keypad that will work with my Vista 20P alarm system. It seems to me this would exist to allow a home owner to easily add the WiFi keypad that would work just like a...
Showing results 1 to 25 of 29
 


 
Forum Jump