Search: Posts Made By: mastergasfitter
Showing results 1 to 25 of 50
Search took 0.01 seconds.
01-17-06, 07:04 PM
Replies: 9
Views: 1,078
Posted By mastergasfitter

I guess i am doing my home work. I am going to...

I guess i am doing my home work.
I am going to take pictures.
01-17-06, 05:22 PM
Replies: 9
Views: 1,078
Posted By mastergasfitter

I just want to do it correctly. every electrician...

I just want to do it correctly. every electrician i talked to so far wants to do a line tap. I dont believe that is correct.

If i get a 200 with a feed thru and feed to the 150 would that be to...
01-17-06, 03:26 PM
Replies: 9
Views: 1,078
Posted By mastergasfitter

load center

does anyone know where i can buy a 150 amp load center service rated with feed thru lugs with 2 breaker spaces
01-15-06, 09:17 AM
Replies: 2
Views: 1,493
Posted By mastergasfitter

you should always Have a licensed electrician ...

you should always Have a licensed electrician

this will help with your nec
http://www.mikeholt.com/codeforum/ultimatebb.php?ubb=forum;f=11

1. Is 2" schedule 80 PVC conduit the common thing to...
01-14-06, 03:45 PM
Replies: 5
Views: 1,549
Posted By mastergasfitter

it could be a selector switch. off bake broil ...

it could be a selector switch. off bake broil
It could be the timer is set for timed cooking. could be a broken wire
it could be a lot of things.
If you know how to use an electric meter . then...
01-14-06, 03:40 PM
Replies: 4
Views: 4,662
Posted By mastergasfitter

without being there its hard to tell try this...

without being there its hard to tell
try this link

http://www.partadvantage.com/store/showpart/10597328
01-14-06, 02:25 PM
Replies: 4
Views: 4,662
Posted By mastergasfitter

this may help. if you turn the drum by hand with...

this may help. if you turn the drum by hand with the power off can you hear the noise.?
are you able to remove the belt and try to isolate the noise.
could be money stuck behide the drum and the...
01-14-06, 12:41 PM
Replies: 15
Views: 2,248
Posted By mastergasfitter

yes there auto swithes do have that connection on...

yes there auto swithes do have that connection on them and there manual switch does not but there manual switch is a sub panel. having 2 mains is what i am trying to achieve IE.. tap connector Now...
01-14-06, 11:40 AM
Replies: 15
Views: 2,248
Posted By mastergasfitter

if the generator has to be connected as you say...

if the generator has to be connected as you say only to automatic then why do they make a manual transfer switch for this unit.071002
071003 194942GS 2 (10/27/04) 60 Amp NEMA I/NEMA 3R
Manual...
01-14-06, 08:42 AM
Replies: 15
Views: 2,248
Posted By mastergasfitter

I am pulling out the main panel. as noted in my...

I am pulling out the main panel. as noted in my first post "Pull out a 150 amp main load center panel and install a Reliance TTV1506C manual main load center Transfer Panel. The problem is a 220 .75...
01-14-06, 08:01 AM
Replies: 15
Views: 2,248
Posted By mastergasfitter

Utility power charges the battery and allows for...

Utility power charges the battery and allows for weekly exercise turns on the generator during a power failure gives with a 20 sec. warm up and turns off the generator when powered is restored with...
01-13-06, 03:20 PM
Replies: 15
Views: 2,248
Posted By mastergasfitter

the tv1506c is special order since i have a 150...

the tv1506c is special order since i have a 150 amp main. and the Briggs & Stratton gen is a 12kw under nat gas it should provide 55 starting amps and 45 runing I hope i never have to use it. but...
01-13-06, 12:45 PM
Replies: 15
Views: 2,248
Posted By mastergasfitter

manual transfer switch

I have had several estimates for an installation of a manual main load center transfer panel. Pull out a 150 amp main load center panel and install a Reliance TTV1506C manual main load center...
01-10-06, 05:08 PM
Replies: 6
Views: 1,096
Posted By mastergasfitter

ok you sold me get a New furnace

ok you sold me get a New furnace
01-09-06, 04:57 PM
Replies: 2
Views: 900
Posted By mastergasfitter

You will be better off calling in a professional....

You will be better off calling in a professional.
What do you mean by "attach an adapter" what kind? What is it going to do?
The meter main belongs to the gas company if you turn it off you must...
01-09-06, 04:47 PM
Replies: 3
Views: 1,115
Posted By mastergasfitter

Yes its time for a new dryer

Yes its time for a new dryer
01-08-06, 05:43 PM
Replies: 3
Views: 985
Posted By mastergasfitter

Sizing a Transfer switch

House has a 150 amp service.
1 main disconnect in the panel located 10" from the meter
main loads ac and strip heat both are on the same circuits although the ac will draw about 15 amps the heater...
Forum: Water Heaters
01-08-06, 02:58 PM
Replies: 16
Views: 2,001
Posted By mastergasfitter

sounds like someone installed a check valve on...

sounds like someone installed a check valve on the cold water side.
and in that case you created a closed system anda closed system needs an expansion tank on the hot side.
I see this all the time...
Forum: Water Heaters
01-08-06, 02:48 PM
Replies: 3
Views: 1,052
Posted By mastergasfitter

turn it off now call a plumber to replace it. ...

turn it off now
call a plumber to replace it.
its what we call a leaker
01-08-06, 02:34 PM
Replies: 4
Views: 1,598
Posted By mastergasfitter

it sounds like a defective motor it is possible...

it sounds like a defective motor
it is possible that it needs a start capacitor or start windingS
if the motor hums and doesnt blow.
i suggest calling a professional out
01-08-06, 01:38 PM
Replies: 23
Views: 5,440
Posted By mastergasfitter

the ignitors are sensitive to voltage polarity. ...

the ignitors are sensitive to voltage polarity.
Make sure you have the proper voltage first.
make sure the unit is grounded correctly.
have someone who knows how to use an electric meter
test the...
Replies: 3
Views: 1,829
Posted By mastergasfitter

do you have a model number. is this a touch pad...

do you have a model number.
is this a touch pad timer
01-08-06, 09:35 AM
Replies: 8
Views: 8,383
Posted By mastergasfitter

if it works dont fix it. there must have been a...

if it works dont fix it. there must have been a reason for the .6GPH=86400 btu's .75=108000
What is cycling. flame detection. blower ? high limit?
call the guy back he increased your BTU's about...
01-08-06, 09:14 AM
Replies: 4
Views: 1,277
Posted By mastergasfitter

be more detailed everthing shuts off just...

be more detailed
everthing shuts off
just burners shut off
pilot or ignitor shuts off
01-08-06, 09:12 AM
Replies: 5
Views: 2,895
Posted By mastergasfitter

you need to check your power to the unit. ...

you need to check your power to the unit.
You said the fan wont come in even in fan only mode.
looks like that module is installed correctly. did you see if you have 24 volts between TH and GRD...
Showing results 1 to 25 of 50
 


 
Forum Jump