Search: Posts Made By: Geochurchi
Showing results 1 to 25 of 200
Search took 0.02 seconds.
Yesterday, 04:48 PM
Replies: 18
Views: 208
Posted By Geochurchi

OK, I see the UL listing ,wasnít looking at that...

OK, I see the UL listing ,wasnít looking at that page.
Geo🇺🇸
Yesterday, 12:13 PM
Replies: 18
Views: 208
Posted By Geochurchi

Hi, donít see any UL listing on that device. Geo

Hi, donít see any UL listing on that device.
Geo
08-06-20, 01:32 PM
Replies: 26
Views: 462
Posted By Geochurchi

Glad you let us know you got it fixed, it might...

Glad you let us know you got it fixed, it might not be a bad idea to replace that contactor.
Geo
08-06-20, 09:42 AM
Replies: 2
Views: 87
Posted By Geochurchi

Well, that is a real mess, are your having any...

Well, that is a real mess, are your having any issues with the panel, why are those neutral and ground conductors floating around in there? Unless you really have a need to replace it I might suggest...
08-05-20, 12:09 PM
Replies: 26
Views: 462
Posted By Geochurchi

Hi, itís not a good idea to manually push that...

Hi, itís not a good idea to manually push that contactor in it could result in severe personal injury, anyway , you donít have any power to the control wires at the condenser, can you post a pic of...
08-04-20, 03:29 PM
Replies: 3
Views: 93
Posted By Geochurchi

Hi, I didnít see where the resistor is required,...

Hi, I didnít see where the resistor is required, you do however need a constant 24VAC to that Tekmar plus 2 wires to the RW terminals on the Taco.
Geo
Replies: 7
Views: 147
Posted By Geochurchi

Hi, which box did you run the wire from the...

Hi, which box did you run the wire from the fixture to? if it comes into the switch box, the white conductor will be connected to the group of whites in the switch box, the black will go to one...
Replies: 5
Views: 127
Posted By Geochurchi

Hi, $2.00 tops, how do you plan on powering them...

Hi, $2.00 tops, how do you plan on powering them up ,draping cords ?
Geo
Replies: 24
Views: 388
Posted By Geochurchi

Bill, thatís correct , interrupt the red is fine,...

Bill, thatís correct , interrupt the red is fine, try one other thing, put the LWCO back the way you had it, and test the LWCO , the safety circuit is interrupting the feed to the vent motor, give it...
Replies: 24
Views: 388
Posted By Geochurchi

Hi Bill, remove the Orange wire from the Y...

Hi Bill, remove the Orange wire from the Y terminal on the control and see if the boiler fires, also is there a plug on the vent ? if so remove it and see if the boiler fires, also post a clearer...
08-03-20, 07:00 AM
Replies: 4
Views: 104
Posted By Geochurchi

Hi, did this system work before you changed the...

Hi, did this system work before you changed the Tstats ? What was the reason you changed them?

Geo
Replies: 24
Views: 388
Posted By Geochurchi

Hi Bill, if you remove the Orange wire from the...

Hi Bill, if you remove the Orange wire from the limit, the boiler should shut down, one other thing , there is no call for heat when you are trying this, correct?
it looks like purple and red are...
Replies: 4
Views: 110
Posted By Geochurchi

Hi, I would think the thread size would be...

Hi, I would think the thread size would be standard , just choose the color and length, take the fan motor to HD and match one up.
Geo
Replies: 24
Views: 388
Posted By Geochurchi

Hi Bill, the XX terminals appear to be correct,...

Hi Bill, the XX terminals appear to be correct, they are acting as a thermostat circuit to start the boiler, the thing is that the Taco is doing the same thing as the old control , which leads me to...
08-02-20, 06:13 AM
Replies: 26
Views: 462
Posted By Geochurchi

Hi, what part of the AC unit is going on and off?...

Hi, what part of the AC unit is going on and off?
Geo
Replies: 7
Views: 223
Posted By Geochurchi

Hi, will the gas supplier give you any kind of a...

Hi, will the gas supplier give you any kind of a deal ? so will when converting from oil.
Geo
08-01-20, 01:28 PM
Replies: 12
Views: 218
Posted By Geochurchi

Hi, first off donít use those back stab...

Hi, first off donít use those back stab terminals, it looks like the brass link on that receptacle may have been removed, hard to tell from the pic, 2 breakers for the room ,if you shut one breaker...
Replies: 5
Views: 152
Posted By Geochurchi

Hi, I may have been wrong on the connection, as...

Hi, I may have been wrong on the connection, as Joed pointed out, Yellow and Red go to fan/ light, black is the feed to the switch, post a mdl # of that switch so that we can be sure.
Geo
Replies: 24
Views: 388
Posted By Geochurchi

Hi, where are the 2 yellow wires from the LWCO...

Hi, where are the 2 yellow wires from the LWCO connected, those are the safety circuit for the LWCO, pics please, which Taco LWCO do you have? The 2 yellow wires look suspicious.
Geo
...
Replies: 5
Views: 152
Posted By Geochurchi

Hi, you should be able to install a single pole...

Hi, you should be able to install a single pole switch, you want light/ fan to be controlled by 1 switch​​​​​​, correct? it looks like the yellow is the feed for the switch, that black wire will go...
08-01-20, 05:05 AM
Replies: 36
Views: 554
Posted By Geochurchi

Hi, have you set up the account for that stat?...

Hi, have you set up the account for that stat? The original stat was a Carrier and only had 3 wires connected, correct? I would still suggest that you remove the cover for the control panel and see...
08-01-20, 04:32 AM
Replies: 5
Views: 165
Posted By Geochurchi

Hi, have you checked for good ground connections,...

Hi, have you checked for good ground connections, possibly around the limit switches?
Geo
07-31-20, 05:22 PM
Replies: 36
Views: 554
Posted By Geochurchi

Hi, if you jump R to Y at the Stat will the...

Hi, if you jump R to Y at the Stat will the condenser start?
Geo
07-31-20, 03:05 PM
Replies: 36
Views: 554
Posted By Geochurchi

Hi, have you identified for sure which cable goes...

Hi, have you identified for sure which cable goes to the condenser?
Geo
07-31-20, 01:00 PM
Replies: 7
Views: 229
Posted By Geochurchi

Hi, charge the system with dry nitrogen and use...

Hi, charge the system with dry nitrogen and use soap bubbles, look for oil around the piping, DO NOT push the contactor in manually, if that compressor was shorted it could cause you personal injury....
Showing results 1 to 25 of 200
 


 
Forum Jump