Search: Posts Made By: phann
Showing results 1 to 8 of 8
Search took 0.01 seconds.
Replies: 22
Views: 3,136
Posted By phann

yes

The wheels still turn freely without the bolt...a little drag as the chain still attached. You need to just turn to align the holes. I will try this type of bolt and see how it goes. Thanks again....
Replies: 22
Views: 3,136
Posted By phann

Bolt is free from Chain

Hi all and thanks for trying to help here.
Answer still not solved but from the manuel pics, appears that a nut and bolt go through the drive sprocket and shaft.
Only one bolt supports the drive....
Replies: 22
Views: 3,136
Posted By phann

#655?

Hi, judging from the pic, #655 looks more right...The pin, bolt or clevis pin or what name it has goes in the sprocket closer to the wall. Only one side has that support, the other wheel does not...
Replies: 22
Views: 3,136
Posted By phann

Recall

The recall last year was for the Carburator that was replaced.
Have not herd from Sears now of any other issues.
I have a waranty till end of this year. Just trying to get this running as the...
Replies: 22
Views: 3,136
Posted By phann

Wheel..

Forgot that ?
Yes the wheels turn when you left off ground..but you can stop them by your feet as no torque to them.
They are getting a bit of traction from the akle.

Hope that helps.
Replies: 22
Views: 3,136
Posted By phann

turns ok..

When you turn the wheels, shaft not locked onto drive sprocket. A bolt or Clevis pin is reqiured between the two or the shaft turns, not the wheels.
I did try hardened bolts, clevis pin and both...
Replies: 22
Views: 3,136
Posted By phann

Reply..

Thanks for the fast response. The model # is C950-52431-0.

When I took the cover off, inside where the friction plate is located, seen a hole in the axle and drive sprocket that appeared to have a...
Replies: 22
Views: 3,136
Posted By phann

Sears Clevis pin breaks

Hi, have a 3 year old Sears snowblower 11 horse power 30" mouth.
Was working fine till it would not go forward or backwards.
I pulled off the bottom plate and checked and all I could fine was the...
Showing results 1 to 8 of 8


 
Forum Jump