Search: Posts Made By: mowermonkey
Showing results 1 to 25 of 53
Search took 0.01 seconds.
Replies: 1
Views: 2,328
Posted By mowermonkey

yes, clutching for sure. remove the belt, clean...

yes, clutching for sure. remove the belt, clean matting surfaces and adjust the assembly for slight free play . check for broken or cracked parts also the little cam sliders on the driven clutch,...
Replies: 4
Views: 712
Posted By mowermonkey

rotors are rotors, all you pay for is a name...

rotors are rotors, all you pay for is a name brand. We always use the best pads at work as we have to warranty our work, again, you get what you pay for
Replies: 2
Views: 1,736
Posted By mowermonkey

Check fuel pump presssure. Ive always enjoyed...

Check fuel pump presssure. Ive always enjoyed getting em to the repair shop with my buddy cranking and the other banging on the fuel tank with a large hammer. Altho have seen regulators, relays and...
Replies: 2
Views: 896
Posted By mowermonkey

Just suggesting once your in do er all. Take it...

Just suggesting once your in do er all. Take it from experience. Watch out for that hidden 10mm bolt and have patience grasshopper.
Replies: 15
Views: 3,017
Posted By mowermonkey

Why do you think its the cam sensor? Symptoms ?...

Why do you think its the cam sensor? Symptoms ? Engine & trans ? INFORM US
Replies: 4
Views: 1,512
Posted By mowermonkey

oh yea

I bought my Mom & Dad a dixie chopper. At times an up-grade is good.
Replies: 2
Views: 704
Posted By mowermonkey

Black smoke normally is un-burned fuel. Blue is...

Black smoke normally is un-burned fuel. Blue is oil leakage out of the exhaut, And white is normally a water leakage problem. to me I will need your carb and vin #s to properly diagnose
Replies: 3
Views: 1,316
Posted By mowermonkey

please check fuel pump pressure, cracked fuel...

please check fuel pump pressure, cracked fuel lines, deepening on the year the contrtol moduule locacated by tbe distributer may affect your delivery, of course never look the obvious, restricted...
Replies: 5
Views: 1,014
Posted By mowermonkey

Hey, Bruce here again, Dad just left for the...

Hey, Bruce here again, Dad just left for the hunting shack and his saw wouldnt run because of bad gas over 6 months and a plugged carb that was internally varnished. Most chainsaws run off vacuum...
Replies: 6
Views: 2,062
Posted By mowermonkey

Diagnostics fer-shere

As I was trying to explain internal leakage, I over looked the fact of white smoke being air and oil leaking past the rings and/or valves.Im thinking coolant as in leaking head gasket, which...
Replies: 6
Views: 2,062
Posted By mowermonkey

Sounds like your getting air into the system ....

Sounds like your getting air into the system . Intake, gasket or a valve not seating properly
Replies: 5
Views: 1,014
Posted By mowermonkey

Check to see if theres a screen over the muffler...

Check to see if theres a screen over the muffler . alot of times they plug up with carbon, if not check restriction in the muffler itself. If it wont come apart we flambay them with an oxy/acetylene...
Replies: 1
Views: 951
Posted By mowermonkey

YES ! Some of the neighbors had em when we had...

YES ! Some of the neighbors had em when we had our QA-50s. Get the tag info off the fork stem plate and you should be able to research
Replies: 1
Views: 735
Posted By mowermonkey

First the smaller fuel line is the return, why do...

First the smaller fuel line is the return, why do you ask ??? On my 91 Ranger my ADL connector is off the wiring harness, clipped into the fender with what looks like a dead end plug kind of triangle...
Replies: 1
Views: 860
Posted By mowermonkey

Its pretty tight in there but once you get...

Its pretty tight in there but once you get everything out of the way its pretty easy.
Replies: 5
Views: 13,159
Posted By mowermonkey

Youll notice multiple holes where the spring is...

Youll notice multiple holes where the spring is on the govener. moving that spring to another hole will increase your speed. Then if your really good tear it down, remove the govener assembly cut the...
Replies: 3
Views: 1,504
Posted By mowermonkey

HMMMMM, Buddy Eh, Bored out but not sure how...

HMMMMM, Buddy Eh, Bored out but not sure how much? Sounds like a good way to loose a buddy. Put your money in a bike that runs and you have ridin, all the way from cold start to shootin er up a large...
Replies: 8
Views: 60,330
Posted By mowermonkey

Rear engine snappers

We run alot of the old rear engine snappers up here, the easy thing with them is you switch the gears around in the differential and your in excess of 50plus M.P.H Of course alot of other mods are...
Replies: 1
Views: 983
Posted By mowermonkey

87 Ford ranger 4x4 2.9 Liter, auto Issues

Hey all, got a 89 Ranger for nothing. At times when Im driving it will not idle or cruise and only runs at (WOT) wide open throttle. Checked the catalyatic converter, fuel pump pressure, fuel filter...
Replies: 5
Views: 699
Posted By mowermonkey

Fine Tuning the A4LD Transmission

Well despite recommendations I did the flush on the Trans. Also installed a new vacuum modulator. Shifting much better now. Does any one know what the screw head is in the vacuum port on the...
Replies: 1
Views: 784
Posted By mowermonkey

A4LD transmission question

Hey All, Got a 90 Ford ranger 2.9 with a a4ld trans. Does anyone know what type of screw is in the vacuum modulator. Ive been using a small flathead screwdriver, but doesnt seem to fit properly....
Replies: 5
Views: 699
Posted By mowermonkey

It just started doing this earlier in the last...

It just started doing this earlier in the last week, We had a couple of fairly warm days where it was not as noticable. Thanks
Replies: 5
Views: 699
Posted By mowermonkey

My Transmission has a mind of its own

Hey all, Got a 90 Ford Ranger 2.9 liter, 4-speed automatic (3-speed w/overdrive) Checked vacuum going to modulator, fluid slightly discolored (brownish) but not burnt, fluid level good.When I start...
Showing results 1 to 25 of 53
 


 
Forum Jump