Search: Posts Made By: geogrubb
Showing results 1 to 25 of 200
Search took 0.02 seconds.
Replies: 5
Views: 97
Posted By geogrubb

With the engine running spray/dribble some...

With the engine running spray/dribble some carb/brake parts cleaner behind the carb and along the mating surfaces if the engine tempo changes you have an air leak. Have a good one. Geo
Replies: 5
Views: 97
Posted By geogrubb

Check the spark arrestor in the muffler it might...

Check the spark arrestor in the muffler it might be clogged. Have a good one. Geo
Replies: 5
Views: 247
Posted By geogrubb

Without the make and model it is very difficult...

Without the make and model it is very difficult to solve your problem, you are asking how long is a rope. Have a good one. Geo
Replies: 23
Views: 447
Posted By geogrubb

Before you start enlarging jets and stuff, with...

Before you start enlarging jets and stuff, with the engine running try spraying some brake parts cleaner behind the carb and along the mating surfaces if the engine tempo changes you have an air leak...
Replies: 4
Views: 146
Posted By geogrubb

First you must fix the leaking needle and seat....

First you must fix the leaking needle and seat. Then
The bolt that holds the carb bowl on is the main jet it has a hole down the center and one across the bottom make sure they are clean and your...
Replies: 11
Views: 590
Posted By geogrubb

Greynold if the old Weedeater mower has the carb...

Greynold if the old Weedeater mower has the carb setting on top of the gas tank the procedure below should solve the problem. Have a good one. Geo
You need to install a new diaphram kit, it is...
Replies: 5
Views: 262
Posted By geogrubb

Go to the re-power section and see what they...

Go to the re-power section and see what they recommend. Have a good one. Geo

Home - Small Engine Warehouse (http://www.smallenginewarehouse.com/)
Replies: 8
Views: 207
Posted By geogrubb

In the future I would suggest using brake parts...

In the future I would suggest using brake parts cleaner rather than carb cleaner as the brake parts cleaner leaves no residue. Have a good one. Geo
Replies: 8
Views: 207
Posted By geogrubb

This video points out some of the circuitry for...

This video points out some of the circuitry for the carb. Have a good one. Geo
https://www.youtube.com/watch?v=HaMqiHvWGec
Replies: 8
Views: 207
Posted By geogrubb

I don't have any idea what carb you have on your...

I don't have any idea what carb you have on your item, however,
Somewhere in the back of my mind I seem to remember that if the vent in the top of the carb is clogged it can create this condition....
Replies: 12
Views: 247
Posted By geogrubb

Of the side to side tilts, Always tilt a mower...

Of the side to side tilts, Always tilt a mower carb side up. Have a good one. Geo
Replies: 13
Views: 347
Posted By geogrubb

If it is the one where the blades are loose the...

If it is the one where the blades are loose the problem I had was I had to run the trimmer at high speed to get the blades to cut anything, at lower speed the blades would just fold back when they...
Replies: 9
Views: 320
Posted By geogrubb

No one seem to be answering your question on how...

No one seem to be answering your question on how to adjust the carb, first if you don't have the special adjustment tool you will need to do a workaround to remove the adjustment screws and cut a...
Replies: 30
Views: 704
Posted By geogrubb

Try loosening the fuel cap it sounds like it is...

Try loosening the fuel cap it sounds like it is not venting properly, if that helps then clean or replace the cap. Have a good one. Geo
Replies: 4
Views: 227
Posted By geogrubb

The wheels you are speaking of sound like they...

The wheels you are speaking of sound like they would be on a golf bag cart probably get one at Goodwill for about $10. Have a good one, Geo
Replies: 4
Views: 172
Posted By geogrubb

Try loosening the fuel cap sounds like it might...

Try loosening the fuel cap sounds like it might be clogged. Have a good one. Geo
Replies: 11
Views: 520
Posted By geogrubb

No one seems to be telling you what you asked,...

No one seems to be telling you what you asked, remove the plug wire, tilt the mower carb side up now and puting a mark on the underside of the deck at the end of the blade check the blade by turning...
Replies: 4
Views: 211
Posted By geogrubb

Sounds like an air leak to me, spray/dribble some...

Sounds like an air leak to me, spray/dribble some carb/brake parts cleaner behind the carb while it is running when the engine tempo changes you have found the leak, probably a bad gasket or a...
Replies: 7
Views: 295
Posted By geogrubb

Please post the engine model, type and code...

Please post the engine model, type and code usually stamped in the engine shroud just above the sparkplug. Have a good one. Geo
Replies: 11
Views: 416
Posted By geogrubb

If when you turn the key you hear nothing the...

If when you turn the key you hear nothing the switch could be bad, if you hear a click when you turn the key the solenoid could be bad, if when you short the solenoid (touch a screwdriver across the...
Replies: 16
Views: 462
Posted By geogrubb

Just remove the blade and reinstall it to make...

Just remove the blade and reinstall it to make sure and everyone will be happy. Have a good one. Geo
Replies: 16
Views: 462
Posted By geogrubb

The blade is loose even though you can;t move it...

The blade is loose even though you can;t move it by hand, remove it and reinstall and everything will be fine. Have a good one. Geo
Replies: 6
Views: 253
Posted By geogrubb

https://hosting.photobucket.com/albums/z120/geogru...

https://hosting.photobucket.com/albums/z120/geogrubb/.highres/BS60000linkage.jpg?width=328&height=199&fit=bounds&crop=fill

Is this it? Have a good one. Geo
Replies: 56
Views: 1,838
Posted By geogrubb

Unless the metering arm is very worn use the old...

Unless the metering arm is very worn use the old one as it has the proper height setting. Have a good one. Geo
Replies: 56
Views: 1,838
Posted By geogrubb

Don't use compressed air around the little carbs...

Don't use compressed air around the little carbs you will destroy more than you will fix, use brake parts cleaner it has enough power in the spray and enough cleaner to do most cleaning and it...
Showing results 1 to 25 of 200
 


 
Forum Jump