Search: Posts Made By: michaelGlenn
Showing results 1 to 17 of 17
Search took 0.01 seconds.
Replies: 4
Views: 1,029
Posted By michaelGlenn

I"ve never seen it but...

It's possible that the master cyl. problem happened first,causing the pads to ride firmly on the rotor,creating heat and causing the crack? Maybe hauling a load was the final straw for the mc and...
Replies: 4
Views: 11,403
Posted By michaelGlenn

just because campers arent 'supposed' to have...

just because campers arent 'supposed' to have shutoffs doens't mean yours doesn't.My son's camper had a myriad of valves and drains on his camper.
most systems switch automatically between city...
Replies: 2
Views: 1,679
Posted By michaelGlenn

please don't be insulted,but..

on our toyo we once in a while accidently push the a/c button..the small one that lights up...and we have no a/c.!
sometimes it's the easy things...





or not.:)
Replies: 3
Views: 1,037
Posted By michaelGlenn

what is a 'steering knuckle?

I"ve heard that term but no applied to autos.Is it one of the ball joints,or the steering arm that comes off of the steering box?
Replies: 7
Views: 1,368
Posted By michaelGlenn

big hub caps like I've seen on some 'buses' could...

big hub caps like I've seen on some 'buses' could sure mess up the balance.
I"d pull them off and see what happens.

uhh....what the heck are you doing 70+ for? :)
Replies: 3
Views: 2,293
Posted By michaelGlenn

can you work bakcwadrs? :)

I found installation insgtructions for 2 models.Maybe work back from them?
http://www.bluestreakchem.com/thet_aquamagic5.html
http://www.bluestreakchem.com/thet_aquamagic4.html

sorry I couldn't...
Replies: 3
Views: 1,969
Posted By michaelGlenn

`plastic,or copper? I"ve fixed a few,might...

`plastic,or copper?

I"ve fixed a few,might be able to help.ya never know.
Replies: 5
Views: 6,051
Posted By michaelGlenn

cleanliness counts!!

did you clean the cable terminals and put them on TIGHT!?
My guess is also the ground cable..remove it from the block,clean the area and the cable end and re attach.
If this no-cost fix doesn't do...
Replies: 5
Views: 11,821
Posted By michaelGlenn

If just replacing the master cylinder..

I prep the Master the same way that MrT does,than attach both brake lines just to the point of snug.
Then while a helper pushes the pedal down I open both lines,then close them before he/she lets...
Replies: 3
Views: 883
Posted By michaelGlenn

not familiear with that particular enging,but

some engines I've pulled plugs on had a spacer of some sort under the spark plug,any such critter on these,and did u maybe leave it oiut..or not see it and it's laying on the engine?
I'd pull the...
05-07-07, 07:44 AM
Replies: 9
Views: 1,805
Posted By michaelGlenn

I know it wold cost a few bucks

but a small thank you ad in the local paper would be a great way to repay their honesty.
you could even put it as a 'Rave' in the Rants and Raves section of Craigslist.
It's a crummy section of...
Replies: 4
Views: 1,692
Posted By michaelGlenn

Craigslist rocks!

at least around Portland,Or it does.I just sold a truck camper on there tonight THE SAME DAY I PLACED THE AD.
I"ve had similiar results with many other itmes on there as well.
Be sure to read their...
05-03-07, 06:53 PM
Replies: 9
Views: 1,805
Posted By michaelGlenn

she is an adult

and that will be the dealers' stance.
I serously doubt that they will take the car back,and will just say that her trade in is gone..which it may well be...and the deal is done.
PLease let us know...
Replies: 3
Views: 931
Posted By michaelGlenn

a C-clamp comes in handy

To push the piston back into the caliper.Before you push it back in remvoe wsome brake fluid from the master cylinder.Another way is to just open the bleeder to let pressure relieve itself while...
Replies: 3
Views: 3,170
Posted By michaelGlenn

Looks to be above my skill level

was reading a book last night and in BOLD PRINT,manymany times it said you MUST HAVE a certain tool to bleed the brakes,whish is what I think it takes to reset the swtich.
I think they called it a...
Replies: 3
Views: 3,170
Posted By michaelGlenn

1991 dodge dakota anti lock light is on

I repleaced the front pads but did not lose any fluid so did not bleed.The truck stops fine but the light stays on.Will I need to bleed it or reset a s switch,or???

Thanks.
Mike, a new member
Replies: 2
Views: 1,045
Posted By michaelGlenn

what is not working exactly

I have some rv experience tho not a tech by trade.I"ve built hundreds of triallers and owned a few rigs myself...older ones.

hoping I can help.
Mike
Showing results 1 to 17 of 17


 
Forum Jump