Search: Posts Made By: flirty1
Showing results 1 to 25 of 200
Search took 0.02 seconds.
Replies: 5
Views: 313
Posted By flirty1

Ok so I used these adapters here...

Ok so I used these adapters here (https://www.amazon.com/gp/product/B07CQMV44K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) and it does fit. So ran the antenna through a convertor box and stuck...
Replies: 5
Views: 313
Posted By flirty1

Using PAL antenna in the USA

So I purchased a couple HDTV antennas off of eBay model EY-AN0666BK and while the instructions on the box are all in Spanish It also has a PAL connector instead of a RF connector. I can get a Female...
06-11-20, 06:26 PM
Replies: 3
Views: 163
Posted By flirty1

Ok did some more investigation. There are no...

Ok did some more investigation. There are no status lights lite on the green box that has a wire going to the A/C. I turned the T-stat to cool the indoor blower came on I went outside and no...
06-10-20, 05:30 PM
Replies: 3
Views: 163
Posted By flirty1

Outside Unit not running when set to cool

So I just moved into this house and it got warm enough to run the A/C only When i set the T-stat to cool only the indoor fan comes on. The outside unit does not. The outdoor unit is a older lennox...
Replies: 6
Views: 394
Posted By flirty1

I do have cable hookup in the room with the...

I do have cable hookup in the room with the computers. So even if I buy a cable modem from the yellow price tag logo store I still have to have the cable company's permission to use it? I have cable...
Replies: 6
Views: 394
Posted By flirty1

Do i need a triple play modem

So I want to add a 2nd cable modem upstairs instead of running Ethernet all over. I currently have WOW! phone internet and TV. I see modems that say not for voice. The main modem supplied by the...
Replies: 3
Views: 259
Posted By flirty1

Gateway solo 9550 won't boot into bios after hardrive change

I have a gateway solo 9550. I replaced the 30GB hardrive that was in it as PC check 6.21 and 8 said it was bad. it wouldn't even pass the destructive write test. I put a new 100Gb seagate IDE...
Replies: 2
Views: 372
Posted By flirty1

Getting Ubuntu to run on a Mac powerbook G4

Hello.

I got a Mac powerbook G4 model A1046
15 inch display CD/DVD drive 1Ghz processor. I'm trying to get Ubuntu 16.04to install and its not happening. I first downloaded a Lubuntu 16.04...
Replies: 3
Views: 364
Posted By flirty1

I've tapped on the relays with a screw driver and...

I've tapped on the relays with a screw driver and no change. The motor gets power for a split second then freewheels down. Something is not sending power to it. I've included a couple pictures of the...
Replies: 3
Views: 364
Posted By flirty1

Sony TC-765 Reel To Reel Tape Recorder tape tension issues

I have a Sony TC-765 Reel to reel 4 track 2 channel duel capstan drive 3 motor 3 head reel to reel tape machine. When I got the unit the pinch rollers were gummed up and would not engage. I got them...
Replies: 5
Views: 850
Posted By flirty1

These...

These (https://www.amazon.com/gp/product/B07QW73RJS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) are the cameras that I'm installing. Each one comes with it's own A/C adapter.
Replies: 5
Views: 850
Posted By flirty1

Running ethernet for security cameras

I'm installing some wireless security cameras that can either connect to the wifi or Ethernet. I want to use Ethernet but I have a couple questions. The router is located at one end of the house. The...
Replies: 4
Views: 5,000
Posted By flirty1

The fault message is "service". That's the...

The fault message is "service". That's the message I get. It just says "service" on the screen. I reset it by pressing the SET button but it comes back awhile later. The manual doesn't say what the...
Replies: 4
Views: 5,000
Posted By flirty1

Ingersoll Rand Industrial Air compressor Service alarm

We have a industrial Ingersoll Rand screw type air compressor at the shop model SSR-UP6-40-150 serial PG2474U06116. It has the INTELLISYS control. The display keeps saying SERVICE and has the...
Replies: 5
Views: 646
Posted By flirty1

Ok update. I checked the pump, nothing...

Ok update.

I checked the pump, nothing trapped in it. Ended up overhauling it and put a new motor,clutch,coupler,and start capacitor and it runs again. One thing I noticed is the machine uses the...
Replies: 5
Views: 646
Posted By flirty1

Kenmore 80 washing machine hums and dims lights

I have a Kenmore 80 series top load washing machine model 110.92281100 Serial CC2063139. It was working fine but when it came time for the rinse drain it just hummed and the lights dimmed slightly. I...
Replies: 5
Views: 654
Posted By flirty1

The aftermarket card is brand new off of Amazon....

The aftermarket card is brand new off of Amazon. It says its made for xp though it failed the logo test. I removed the graphics card and ran the game off of the onboard graphics card and it worked...
Replies: 5
Views: 654
Posted By flirty1

Roller coaster factory 1 and 2 not working correctly in WIN XP Home

Computer is a Emachines W3502 Running WIN XP Home SP3 with Unofficial SP4 installed.

2GB ram
250GB Maxter HDD
Intel celeron D processer 352 3.20 Ghz 533 Mhz FSB 512MB L2 cache
EVGA Nividia...
11-27-16, 07:17 PM
Replies: 8
Views: 799
Posted By flirty1

Range is gas. The water heater is inside. Ill...

Range is gas. The water heater is inside. Ill have a electrician replace the outside panel or bypass it all together and redo the water heater so its fed from the outside panel and replace the...
11-27-16, 05:17 PM
Replies: 8
Views: 799
Posted By flirty1

OK the main panel disconnect box on the inside is...

OK the main panel disconnect box on the inside is rated at 50 amps max so that would need to be upgraded to at least 75 amps if the breaker outside can be upgraded to 100 amps. The wires going into...
11-27-16, 01:18 PM
Replies: 8
Views: 799
Posted By flirty1

The outside breaker is 50 amp with a 30 amp for...

The outside breaker is 50 amp with a 30 amp for the 240 water heater and the inside is 40 amp for everything else.

73690
11-26-16, 11:28 PM
Replies: 8
Views: 799
Posted By flirty1

Running 240 volt dryer line

I want to run a 240 volt dryer line and was wondering if i have enough spare power to run a electric dryer. I live in a trailer(i own it) i have a 50 amp circuit at the meter outside that feeds a 40...
11-19-16, 05:21 PM
Replies: 8
Views: 3,087
Posted By flirty1

I wasnt trying to go in business for myself yet....

I wasnt trying to go in business for myself yet. I would work for KW as one of their agents but im trying to figure out what happens once i get my license. They train me but if i have to register and...
11-19-16, 01:15 AM
Replies: 8
Views: 3,087
Posted By flirty1

Becoming a Real estate agent

So I was thinking of going into the real estate business. The company That I was to go to(The red company) offered free training I just had to pay $99 to sign up for the online per-courses(Michigan...
Replies: 6
Views: 1,089
Posted By flirty1

I got it working again. I replaced the 3 bad...

I got it working again. I replaced the 3 bad capacitors and it fully works again and so far it is holding the time.
Showing results 1 to 25 of 200
 


 
Forum Jump