Search: Posts Made By: cookman
Showing results 1 to 25 of 37
Search took 0.01 seconds.
Replies: 5
Views: 715
Posted By cookman

Thanks guys, where would I check the pressure? I...

Thanks guys, where would I check the pressure? I just replaced the fuel filter within last 3 months. I have only had the truck for about 4,000 miles and don't know about the tune up. I may try that...
Replies: 5
Views: 715
Posted By cookman

Fuel Pump???

I have a 1998 Chevy Van that is giving me some problems. When I start it up first thing in the morning it fires right up. If I take any shorts trips it seems to give me alot of problems restarting. I...
Replies: 8
Views: 3,948
Posted By cookman

Thanks for the replies guys. I am going to...

Thanks for the replies guys. I am going to install a Williamson boiler. From what I can gather they are made by Weil McClain but called Williamson. I looked up their install manual and it does show...
Replies: 8
Views: 3,948
Posted By cookman

Boiler Bypass

My next question but I'm sure not my last. I am going to install a new boiler for a relative who is on a budget and can't really afford the pros coming in. I will do the heat loss and size it right...
Replies: 8
Views: 1,406
Posted By cookman

Thanks guys, I appreciate your replies.

Thanks guys, I appreciate your replies.
Replies: 8
Views: 1,406
Posted By cookman

Heat Loss Program

Is there any free heat loss software out there anymore? I thought that I downloaded one from slant fin website but I can't find it anymore. Please let me know if you guys know of any. Thanks.
Replies: 4
Views: 657
Posted By cookman

I hate to say this but it looks like its off to...

I hate to say this but it looks like its off to the mechanic. I've changed my fair share of brakes so I didn't think that was the reason but I'm no mechanic either. Thanks for all of your replies...
Replies: 4
Views: 657
Posted By cookman

The check engine light has been on since I bought...

The check engine light has been on since I bought the van 2 years ago. I guess my question is, is there something that I have to reset or did I not do something when I changed the brakes?
Replies: 4
Views: 657
Posted By cookman

Changes my brakes, now problems

Hi, I have a 1998 Chevy 3500 dually van. I just changed the front brakes and everything went OK. I drove it right after changing them and had no problems but now when I drive it after about 5...
Replies: 1
Views: 884
Posted By cookman

Husqvarna won't start

Hi Guys, I have a husqvarna yht2148 that won't start. I think part of the problem is that I grabbed the wrong gas can with some old gas and put it in the tank. I did drain it and add fresh gas along...
Replies: 3
Views: 5,135
Posted By cookman

What would be the correct way to determine what...

What would be the correct way to determine what size I need? I looked at beacon morris website but they talk about gallons per minute and I don't know how to measure that. Thanks for the reply.
Replies: 3
Views: 5,135
Posted By cookman

Toe Kick Heater Sizing?

We are remodeling our kitchen and need all the walls for additional cabinet space. Wondering what size toe kick heater to install. The kitchen is 19' x 14' with 8' ceilings, the only exterior wall is...
Replies: 2
Views: 2,221
Posted By cookman

Truck Charging Trailer Battery

I have a Bri Mar dump trailer that has two ring connectors in the pump box. The one is yellow and looks like it goes to and inline fuse and the other is black. I am assuming that I hook up the yellow...
Replies: 2
Views: 4,093
Posted By cookman

Black Shingles=Bad News???

I am going to put a new roof on my house soon. The local roofing supply has a closeout sale on Owens Corning 30 year shingles, the only problem is they are Black Onyx. The roof I am replacing is...
Replies: 13
Views: 1,652
Posted By cookman

Sorry for the delays in replying, have been busy...

Sorry for the delays in replying, have been busy for a couple of days. The 90 on the third floor is the baseboard ell. No air scoop and expansion tank up there, they are in the basement at the...
Replies: 7
Views: 1,932
Posted By cookman

I didn't realize I was buying such a beefy...

I didn't realize I was buying such a beefy compressor from Sears. The info on the unit says that its a 30 gallon, 150 psi, 6hp max developed and 2 hp running, 120 volt 15 amp, 8.6 scfm @ 40 psi and...
Replies: 7
Views: 1,932
Posted By cookman

If I can read it right it says that the FLA is...

If I can read it right it says that the FLA is 24.After googling that FLA stands for full load amps. So can I run that off of the 10 gauge wire with a 30 amp breaker without harming the compressor?...
Replies: 7
Views: 1,932
Posted By cookman

Air Compressor pops breaker

I have a Craftsman 110 volt 30 gallon upright air compressor that keeps popping the breaker when it finishes filling the tank. It is plugged directly (no extension cord) into a outlet that is fed...
Replies: 13
Views: 1,652
Posted By cookman

I have a Taco 007. Forgive me for asking but what...

I have a Taco 007. Forgive me for asking but what would that have to do with the airlock? When I do bleed the third floor it seems as though the circ can keep up just fine. Let me know if I'm missing...
Replies: 13
Views: 1,652
Posted By cookman

18 psi when cold. No separate zone for the...

18 psi when cold.

No separate zone for the third floor, house is 1 zone.

I do have boiler drains and ball valves on the third floor to bleed, the other floors are ok as far as heat.

The...
Replies: 13
Views: 1,652
Posted By cookman

I have the boiler at about 18 psi. I installed a...

I have the boiler at about 18 psi. I installed a 90 with a female thread and threaded in a air separator to try and get any air out of there. I figured that the air would come up and hit the...
Replies: 13
Views: 1,652
Posted By cookman

Air Lock on 3rd Floor

I just installed a new heater and keep getting reports of no heat on the third floor. I end up bleeding the third floor and have heat but it goes away after a couple of hours. What am I doing wrong....
Replies: 12
Views: 2,635
Posted By cookman

I think I'm good here. I do have the boiler...

I think I'm good here. I do have the boiler drains on the return to the basement so I shouldn't have a problem getting the air out just wasn't sure about the pressure. It made sense to me but I...
Replies: 12
Views: 2,635
Posted By cookman

Hope you guys don't mind me jumpin in here. The...

Hope you guys don't mind me jumpin in here. The pipe is 1" copper to the second floor and then reduces down to 3/4 to the third. Assuming it is about 25ft or so to the 3rd floor what should the ideal...
Replies: 3
Views: 1,280
Posted By cookman

Calculate Driveway Resurface

How would you figure out how many tons of asphalt you need to resurface driveway. I have a asphalt driveway that needs resurface and I was just trying to get an idea before I call out the experts so...
Showing results 1 to 25 of 37
 


 
Forum Jump