Search: Posts Made By: dudley12
Showing results 1 to 8 of 8
Search took 0.01 seconds.
Replies: 3
Views: 1,883
Posted By dudley12

Wiring glass break sensor

We did some repairs and had to unhook our flexswitch sensor wires at the window site. Now we can't remember how to rehook them. There is a red wire, black wire, green wire and white wire. The...
Replies: 4
Views: 1,371
Posted By dudley12

Thank you. I think the problem is solved. I...

Thank you. I think the problem is solved. I looked at the box the "siren" came in an find out they sent me the wrong one. They sent a speaker instead of the siren I ordered. Thanks for all your...
Replies: 4
Views: 1,371
Posted By dudley12

The siren only has one white wire and one black...

The siren only has one white wire and one black wire one not 3 . Should I have 3 The wiring from the old brinks system has a red and an orange from the wall. I hooked up the wires to the battery...
Replies: 4
Views: 1,371
Posted By dudley12

Ge Concord express siren problem

My siren only makes a clicking sound with an alarm event. Is that normal??? I was expecting a typical siren sound. I have a Dual Tone Siren - Small, Interior - White hardwire siren The wiring...
Replies: 5
Views: 1,387
Posted By dudley12

I installed the resistors and that solved the...

I installed the resistors and that solved the problem with the zones for the windows/doors. Thanks. Do you know the sensor group for a glass break/door magnet on the same zone??? The one room has...
Replies: 5
Views: 1,387
Posted By dudley12

All the learning of the sensors was with the...

All the learning of the sensors was with the doors closed.
I eliminated the flex switched and can arm my system now but still get message "trouble with sensor" on the sensors still active(1,2,3,4)...
Replies: 5
Views: 1,387
Posted By dudley12

Update

I discovered if I delete the sensors on Zone 5 & 6 which have a flex switch (glass break and door sensor) I can arm my system. I do however still get a trouble sensor on sensor 1,2, 3, 4. Is the...
Replies: 5
Views: 1,387
Posted By dudley12

Concord Express

We recently replaced a brinks panel and keypad with a concord express kit. WE do not have it connected to a monitoring company and would like to use it as a stand alone system. I was told i could use...
Showing results 1 to 8 of 8


 
Forum Jump