Search: Posts Made By: Square Head
Showing results 1 to 25 of 187
Search took 0.01 seconds.
Replies: 2
Views: 4,208
Posted By Square Head

Well, I've tried all different positions for the...

Well, I've tried all different positions for the choke.
Yes-also giving it full throttle while pulling too.
What plug do I need here?
A CJ8??
Replies: 2
Views: 4,208
Posted By Square Head

Question Yard Works Weed Trimmer-won't start

Hello again.
My Yard works Canadian Tire Weed trimmer won't fire up. Ran great last year.
It's getting fuel as the plug is wet.
Spark seems not great-hard to tell.
New fuel mixed 30:1.

Eng #...
Replies: 3
Views: 1,895
Posted By Square Head

It seems to be plugged again. So I took it apart...

It seems to be plugged again. So I took it apart to find the ice build up.
I've clean it out and thawing the pipe out more this time.
How long will it take to un plug the drain at room temp?
Replies: 3
Views: 1,895
Posted By Square Head

Well the drain was plugged in the back of the...

Well the drain was plugged in the back of the freezer. There was also ice build up under the freezer floor as well. I cleaned all that up and vacuumed the coils underneath the unit too.
We'll see...
Replies: 3
Views: 1,895
Posted By Square Head

Question Water leaking from freezer to fridge...?

I own a Whirlpool 2200940 fridge with the freezer on top. It's 11 years old and never been an issue. Lately we've had water draining from the freezer to the back of the fridge via the circulation...
Replies: 9
Views: 3,017
Posted By Square Head

Post the engine # and make / serial number so...

Post the engine # and make / serial number so that a qualified Pro here can tell you which carb you have and what rebuild kit is needed.
Replies: 9
Views: 11,735
Posted By Square Head

Question Who Makes The Best Snowblower??

I'm in the market for a new machine. Who in their best opinion feels the best Snowblower is??
Husqvarna
Craftsman
Airens
Poulin
Honda
John Deere

I just want some input before I make the...
Replies: 6
Views: 1,705
Posted By Square Head

I've used Lucas ATF additive to with great...

I've used Lucas ATF additive to with great results.
1995 Ford Contour...CD4E trans. (Junk)
It took a hot tranny with a slight bang shift and turned it into a slick shifting tranny that cooled off...
Replies: 10
Views: 14,756
Posted By Square Head

ASE-why is full Syn Oil crap?? I disagree...

ASE-why is full Syn Oil crap??
I disagree myself.
With Syn Oil, the molecules stay the same size always as they move through the engine and the Visc is way better.
This = better lubrication over...
Replies: 12
Views: 1,389
Posted By Square Head

Nice catch ASE. Personaly, I'm a Ford guy all...

Nice catch ASE.
Personaly, I'm a Ford guy all the way and have had great luck with them too.
Replies: 6
Views: 1,210
Posted By Square Head

I always change my own. Use full Syn oil and a...

I always change my own. Use full Syn oil and a quality filter.
Then I know it's done right.
Replies: 7
Views: 1,588
Posted By Square Head

Ask what you are getting. The guys here are...

Ask what you are getting.
The guys here are right $49 is not enough to change the fluid and filter in the tranny. Sounds like your getting a service check.
Replies: 4
Views: 1,454
Posted By Square Head

Question Hub??

I wonder if it's the bearing in the rear hub letting go??
Be sure to check that with the rear brakes off-spin the hub.
Is it smooth running? With the tire on, check for play with the car off the...
Replies: 27
Views: 4,149
Posted By Square Head

Thumbs up sgull: Post #18 is interesting. 1. Don't...

sgull:
Post #18 is interesting.
1. Don't these Accords have OH Cams in them??

If the restrictor bore was plugged this likely would have happened long ago.
If the bushings brass or bronze were...
10-19-10, 03:40 PM
Replies: 2
Views: 8,608
Posted By Square Head

Question ICG Furnace

Hello, my ICG natural gas furnace won't come on high fan.
The pilot stays on-no issue.
Once the temp drops in the house the 2 burners light. Then, the fan won't run in the auto setting. It runs in...
Replies: 4
Views: 4,651
Posted By Square Head

Thanks for the help. I appreciate it.Beer 4U2

Thanks for the help.
I appreciate it.Beer 4U2
Replies: 4
Views: 4,651
Posted By Square Head

Question It looks like it's sitting on top of the motor /...

It looks like it's sitting on top of the motor / block off to the side. Behind the P/S pump pulley??
Is it under the vehicle behind the tensioner pulley??
Are we talking about the same motor. I'm...
Replies: 4
Views: 4,651
Posted By Square Head

Post 05 Ford Freestar Crank Sensor

Hi guys,
Can someone tell me were the crank position sensor is located on the Freestar? 2005 4.2L V6 engine.
Looks like I have to change one out and I want to gather enough info before starting.
...
Replies: 13
Views: 7,678
Posted By Square Head

Found the tool on E-bay! Well worth the $9! ...

Found the tool on E-bay!
Well worth the $9!

Counter clock-wise to richen the fuel?

There is a Low and a High screw there.
What are the Factory settings?
Thanks
Replies: 19
Views: 9,502
Posted By Square Head

Glad to hear you made it work!! I've had jobs...

Glad to hear you made it work!!
I've had jobs like that too! 2 hours turned into two days!!
Persistence does pay off everytime!!Beer 4U2
Replies: 7
Views: 1,260
Posted By Square Head

I would be surprised if the windshield is...

I would be surprised if the windshield is leaking. Is the fire wall wet on the inside of the car?
If it's anti-freeze then the heater core has sprung a leak.
Is it wet on the driver's or passenger...
Replies: 6
Views: 5,656
Posted By Square Head

I agree, use a quality filter always. You get...

I agree, use a quality filter always. You get what you pay for.
Fram Extra Guard
Ford - they can cross ref. the part #
K&N Filters are good too.
Replies: 19
Views: 9,502
Posted By Square Head

A quality carbide bit should do the trick. At...

A quality carbide bit should do the trick. At least you have a hole 3/4 of the way through. Just keep going up in size in small increments and the bolt will come out.
Replies: 23
Views: 4,515
Posted By Square Head

Yes, get it diagnosed and let us know. The...

Yes, get it diagnosed and let us know.
The computer PCM should put it into limp home mode on it's own. That's what I have read.
Replies: 7
Views: 1,260
Posted By Square Head

Not Likely

The windshield is also installed using urathane sealant between the glass and the frame of the car.
I'd check the floor or the fire wall for a hole / rust etc...
Showing results 1 to 25 of 187
 


 
Forum Jump