Search: Posts Made By: d_s_k
Showing results 1 to 25 of 200
Search took 0.02 seconds.
10-16-20, 12:53 PM
Replies: 14
Views: 330
Posted By d_s_k

If you look to GB they have it upside down, but...

If you look to GB they have it upside down, but they are driving on the left side of the road too. :-)
The reason for the GB solution is that if something falls down it will hit the ground first so...
10-10-20, 04:55 AM
Replies: 36
Views: 774
Posted By d_s_k

Hi from Norway. We live in an area with an old...

Hi from Norway. We live in an area with an old supply system that luckily for you are banned in north America.
We have no neutral at all, so the voltage between the live wires and ground varies....
Replies: 10
Views: 520
Posted By d_s_k

DSL is more sensitive than telephone, and inside...

DSL is more sensitive than telephone, and inside you house you may look at splices and how the wire is going. The DSL goes straight to the line, or at some operators trough a splitter. the DSL...
Replies: 9
Views: 463
Posted By d_s_k

You may use google voice on your cellphone via...

You may use google voice on your cellphone via the wireless network, but not via an ATA.

If we look at history they started with lots of telephone companies who did not cooperate, now we have the...
08-17-20, 08:45 AM
Replies: 21
Views: 527
Posted By d_s_k

It is always best to do it right, and as...

It is always best to do it right, and as patmurphey (https://www.doityourself.com/forum/members/530758-patmurphey)said earlier: "Don't buy a generator that includes the nonsense that you would void...
Replies: 9
Views: 463
Posted By d_s_k

You could take a look at SIPBroker - Login...

You could take a look at SIPBroker - Login (http://www.sipbroker.com) then you may get free incoming calls.
I prefer to pay just a small bill and use Callcentric for North America, and Zadarma for...
08-16-20, 09:58 AM
Replies: 21
Views: 527
Posted By d_s_k

Looking at that generator, that bonding is not...

Looking at that generator, that bonding is not intended to be removed.
If we do not look at rules, but try to analyze the risks of having bonding in Generator and in main panel.
You get e a...
08-07-20, 07:14 AM
Replies: 8
Views: 360
Posted By d_s_k

Actually those systems are genious for people who...

Actually those systems are genious for people who know them, and are able to rewire with the right fuse wire, and extremely dangerous if you put in to thick wire.

They are made to be pulled out,...
Replies: 3
Views: 447
Posted By d_s_k

As mentioned by ThisOldMan ...

As mentioned by ThisOldMan (https://www.doityourself.com/forum/members/586974-thisoldman)the REN load may be an issue, the 302 should not have to high REN load. The other one could probably be...
Replies: 8
Views: 640
Posted By d_s_k

I would also be extremely interested in finding...

I would also be extremely interested in finding out why, even when it doesn't matter, just the way I am :-)
dsk
Replies: 8
Views: 640
Posted By d_s_k

Are you sure you did not reverce one of the other...

Are you sure you did not reverce one of the other jacks?
Shold be OK to reverce the 2 wires to that jack at any point as long as you do it on the right pair.
I aggree in that modern phones are not...
04-21-20, 12:53 PM
Replies: 33
Views: 1,694
Posted By d_s_k

It is pretty much who are different in the USA...

It is pretty much who are different in the USA and here in Norway, we did drill a well and did put up the pump 20 yrs ago. depth 80 meters, distance to our house 30 miters (approx 110 yds) 3 phase...
01-11-20, 12:28 AM
Replies: 4
Views: 214
Posted By d_s_k

May this page help? ...

May this page help?
https://www.knockdoorbells.com/advice_worst_chimes.htm
01-10-20, 01:06 PM
Replies: 8
Views: 433
Posted By d_s_k

Aluminum is scaring me, that is not equal to...

Aluminum is scaring me, that is not equal to dangerous, but it is not allowed here in Norway except for heavy sized wires. The first electrician I met in USA told me he did only use copper, because...
01-10-20, 12:58 PM
Replies: 4
Views: 214
Posted By d_s_k

Since that modell not is a commly well known...

Since that modell not is a commly well known bell, could you please post pitures of it and the details around batteries and wiring?
Replies: 14
Views: 584
Posted By d_s_k

As you see above the P coil on the transformer...

As you see above the P coil on the transformer are not used, but the impedance match will be better, and the circuit is pretty equal to a CB telephone from Kellogg Grabaphone of the same era.
Replies: 14
Views: 584
Posted By d_s_k

Those should work fine, buy 2 in case of the need...

Those should work fine, buy 2 in case of the need of increasing the value.

I have even been thinking more about circuitries, and hva one more idea, witch should even be better than what we already...
Replies: 14
Views: 584
Posted By d_s_k

After some more thinking, I have figured out a...

After some more thinking, I have figured out a way to use it without battery, and where the generator are shorted so it may not do any harm.

The line should be connected to the battey terminals,...
Replies: 14
Views: 584
Posted By d_s_k

Connect line to L1 and L2 Since ringers red wire...

Connect line to L1 and L2 Since ringers red wire goes to L2 I suggest Red (ring ) to L2,
Then Green has to go to L1. From L1 you have the capacitor to the other ringer wire. since you need no gnd,...
Replies: 14
Views: 584
Posted By d_s_k

I would go for a simple solution, just using...

I would go for a simple solution, just using batteries. 3xAAA alacaline. For me they lasts about one year or more.

The capacitor is available on internet, or you crack one out of a defect LED bulb...
Replies: 14
Views: 584
Posted By d_s_k

That is almost true, you ned a capacitor...

That is almost true, you ned a capacitor (condenser) in series with the ringer.
Preferably 0.47 microFarad unpolarized and able to handle a voltage of at least 200V. If you take one from an other...
Replies: 14
Views: 584
Posted By d_s_k

May the schematics be like this:...

May the schematics be like this: https://www.collectorsweekly.com/stories/195164-need-western-electric-wiring-diagram
Replies: 14
Views: 584
Posted By d_s_k

Lucky man! that is a nice one! Ofcourse it...

Lucky man! that is a nice one!

Ofcourse it is possible to modify the circuit, but not use it as it is.
even when the forum has rotary in its name, you will be guided trough step by step there:...
10-31-19, 12:04 PM
Replies: 10
Views: 1,503
Posted By d_s_k

PJmax has a good answer, this is pretty different...

PJmax has a good answer, this is pretty different from what I have seen here in Norway :-) but I see no reason for not doing it that way.

What calculations makes you sure that you need going from...
10-03-19, 07:53 AM
Replies: 13
Views: 465
Posted By d_s_k

by the way look at this:...

by the way look at this: https://www.youtube.com/watch?v=wxe-2wXC4mE
Showing results 1 to 25 of 200
 


 
Forum Jump