Search: Posts Made By: rogerflies
Showing results 1 to 25 of 150
Search took 0.02 seconds.
Replies: 3
Views: 1,860
Posted By rogerflies

We got a technician from the dealer to come look...

We got a technician from the dealer to come look at it. He checked everything, and removed the cover from the evaporator coil inside the freezer. After the refrigerator had been running for a...
Replies: 3
Views: 1,860
Posted By rogerflies

GE Profile Refrigerator works, then doesn't, then works, then doesn't...

It's a five-year-old top freezer 21.7cf model PTS22LCRWW.

It's been working fine until last weekend. We woke up to a freezer full of thawing stuff, and the refrigerator in the high 40s. ...
Replies: 1
Views: 1,351
Posted By rogerflies

Need dimensions for Honda GX360 water-cooled twin

I need a drawing with dimensions for the PTO shaft on the radiator end of the engine and for any threaded holes in the crankcase around the crankshaft that I could use for attaching a piece of...
Replies: 4
Views: 42,708
Posted By rogerflies

Well. I guess the guys at the shop didn't do such...

Well. I guess the guys at the shop didn't do such a good job of seating the bead after all.

I inflated the tire to 30psi, about twice the normal pressure. Then I poured water around the bead so...
Replies: 4
Views: 42,708
Posted By rogerflies

How to fix tire leaking around the bead?

I had to replace one of the front tires on the old Honda tractor I just bought. It's a 15x6x6 tubeless. The old tire had a break in the sidewall from sitting deflated for several years.

I...
Replies: 10
Views: 14,646
Posted By rogerflies

I don't have the mower deck installed, and the...

I don't have the mower deck installed, and the engine is running fine.

I just bought the tractor. It had been sitting in a barn for five years. The previous owner had just parked it after the...
Replies: 10
Views: 14,646
Posted By rogerflies

My tractor doesn't have that adjustment. Is...

My tractor doesn't have that adjustment. Is there a fix?

Roger
Replies: 10
Views: 14,646
Posted By rogerflies

Problem with PTO clutch on Honda HT3813

When engaging or disengaging the PTO clutch at low speed, the engine stalls.

It appears the blade brake isn't releasing completely before the clutch engages, and the clutch isn't disengaging...
Replies: 5
Views: 20,234
Posted By rogerflies

Get a carriage bolt, and put the head on the...

Get a carriage bolt, and put the head on the inside. You may have to file the corners off the square shank to fit the hole. Cut a rubber gasket or use sealer under the head. Put a washer and nut...
Replies: 4
Views: 2,829
Posted By rogerflies

I'd really appreciate that. I can't get either...

I'd really appreciate that. I can't get either one loose with what seems like a reasonable amount of torque in either direction. I'd like to know for sure which way to turn before I put more uumph...
Replies: 1
Views: 1,393
Posted By rogerflies

Honda GX160 gas tank screen problem

The screen assembly in the top of the gas tank keeps coming out when I remove the cap, and it won't stay lined up when I put the cap back on. Is there something that's supposed to hold it in place...
Replies: 4
Views: 2,829
Posted By rogerflies

Honda GX160 QX2 starter -- right or left hand threads?

I've got a Honda GX160 horizontal shaft engine that needs some work on the pull starter. I need to know what kind of threads are on the nut that holds the starter cup to the crankshaft and the screw...
Replies: 3
Views: 14,151
Posted By rogerflies

Here's the picture: ...

Here's the picture:
http://img.photobucket.com/albums/1003/winchman/55HPHondawinch.jpg

It's a smaller and much quieter version of this one:...
Replies: 3
Views: 14,151
Posted By rogerflies

Those screws set the max speed by limiting how...

Those screws set the max speed by limiting how far the throttle lever will move to the left.

When I move the throttle lever all the way to the right, all the linkages and springs are slack, but...
Replies: 3
Views: 14,151
Posted By rogerflies

How do I lower the idle speed on a Honda GX160 engine?

I've built a winch using a 5.5HP Honda GX160 engine. It works fine, but I need to get the idle speed lower for spooling up the line when I'm done.

There's an electric clutch mounted on the...
Replies: 1
Views: 1,139
Posted By rogerflies

Honda GX160 horizontal engine has uneven mounting base

The base of the used Honda GX160 horizontal shaft engine I recently bought has an uneven mounting base. The corner nearest the carburetor looks like it has a slight extension (like a washer) cast...
Replies: 5
Views: 5,204
Posted By rogerflies

The valve appears to be built into the...

The valve appears to be built into the carburetor, so there's no way to disconnect the outlet side to test it.

I let the engine run for several minutes at a moderate speed with the valve 'off'. ...
Replies: 5
Views: 5,204
Posted By rogerflies

Honda GX160 fuel shutoff valve doesn't work.

What do I have to replace to get it to work?

The parts breakdown doesn't show anything other than the petcock lever and a gasket.

Roger
Replies: 11
Views: 5,826
Posted By rogerflies

I'm going to make a guess as to what you're going...

I'm going to make a guess as to what you're going to find when you take the top off the carb.

I think the little wire clip has come off the groove on the valve plunger. That'll let the float move...
Replies: 11
Views: 5,826
Posted By rogerflies

I could tell for sure if you posted a picture of...

I could tell for sure if you posted a picture of the carb, but my guess is that it's a vent for the bowl.

30-60 seconds is about how long it would take to empty the carburetor bowl if there's no...
Replies: 4
Views: 731
Posted By rogerflies

I think Dale replied to your post under the...

I think Dale replied to your post under the thread about boomtastic's 16.5 Briggs Flooding (Strange Issue). Sounds like a good starting point.

Most gas nowadays has some ethanol in it, and it...
Replies: 11
Views: 5,826
Posted By rogerflies

I believe Dale's reply should have gone on the...

I believe Dale's reply should have gone on the thread about
dave237's Carb/intake Problem.
Replies: 11
Views: 5,826
Posted By rogerflies

It sounds like there's something affecting the...

It sounds like there's something affecting the operation of the float in the carburetor, causing the fuel inlet valve to stick open. When the bowl gets full, the gas is forced into the throat,...
Replies: 1
Views: 1,590
Posted By rogerflies

This site has some parts diagrams that might...

This site has some parts diagrams that might help:
http://www.superxpower.com/pages/custompages/viewcustompage/950/Homelite_Parts_Lookup.aspx

Look at "drive case and oil lines" and "engine...
Showing results 1 to 25 of 150
 


 
Forum Jump