Search: Posts Made By: x_789
Showing results 1 to 25 of 33
Search took 0.02 seconds.
Replies: 1
Views: 1,517
Posted By x_789

AC Condenser Coil Repair/Repalcement

I have a new home built last year has a new Lennox AC system. Today my coil was rammed with a 4x4 from a guy installing a fence. Its cold outside an no way to tell if this caused any real damage...
06-30-09, 12:09 PM
Replies: 3
Views: 743
Posted By x_789

I have a temp gun and temps coming out in both...

I have a temp gun and temps coming out in both registers are withing a degree or two. Both cold now and hot durring winter. Originally there was hardly any pressure in this room but I have...
06-30-09, 07:34 AM
Replies: 3
Views: 743
Posted By x_789

Temp Diffrence in Rooms?

Hi I recently moved into a new construction home. I have two bedrooms on the north end of my home. Identical size rooms with the return and thermostat in the hallway in between the rooms. One...
10-23-07, 10:23 AM
Replies: 1
Views: 18,293
Posted By x_789

hardi/cement board ground contact?

I am going to install vinyl siding on a Peer and beam house. The problem is I need something to make contact with the ground with. Can I use Hardi board or will it abosrb moisture? I saw one post...
Replies: 2
Views: 870
Posted By x_789

Another metal roof question

Hello all I am in the process of building my own home. I have done Asphalt roofs before but was thinking about a metal roof. I was wondering a couple things.. First what is the average cost of...
01-05-05, 11:32 AM
Replies: 10
Views: 13,218
Posted By x_789

Jb had a look locally nothing here but 12 gauge. ...

Jb had a look locally nothing here but 12 gauge. Sorry couldn't help you out.. after doing some research looks like this deal was happening back in November and most places were sold out asap from...
01-05-05, 09:43 AM
Replies: 10
Views: 13,218
Posted By x_789

Yup a 20 ga with a 28 in barrel. JB Im up here...

Yup a 20 ga with a 28 in barrel. JB Im up here outside of Tulsa I will check walmart in my city when I head into town later.. If I see one I will let you know. X
01-04-05, 11:34 PM
Replies: 10
Views: 13,218
Posted By x_789

Thanks for the info folks.. I found a New 20/28...

Thanks for the info folks.. I found a New 20/28 Remmington Express for 218 plus a free metal 2 gun case that sells for 55 bucks.. at Acadmey sports. SO I think I got a heck of a deal for a new gun...
01-04-05, 08:21 AM
Replies: 10
Views: 13,218
Posted By x_789

Thanks for the Reply Mattison I was actually...

Thanks for the Reply Mattison I was actually wondering about a new mossberg or I have seen some new guns that seem to be plain jane and had some decent reviews the Charles Daly shotguns.. But I have...
01-03-05, 01:55 PM
Replies: 10
Views: 13,218
Posted By x_789

Inexpensive Shotgun for Home protection and Rec Skeet Shooting

Hello all,
I am in the market for a new shotgon prefer a 20 gauge would like it mainly for just some recreational skeet shooting and for home protection also. No Kids in home so no worries there. ...
11-10-03, 09:57 AM
Replies: 14
Views: 6,873
Posted By x_789

Im in Oklahoma in the real winter months like...

Im in Oklahoma in the real winter months like dec-Feb it will get below frezing and at coldest the highs will be in the teens.. X
11-10-03, 09:43 AM
Replies: 14
Views: 6,873
Posted By x_789

Ok the dude just got done he was a really nice...

Ok the dude just got done he was a really nice guy and spent a couple hours hear checking everything out and it only cost me 75 bucks with a with a 15 dollar coupon.. Still @ 90 bucks for the time...
11-09-03, 09:43 PM
Replies: 14
Views: 6,873
Posted By x_789

I have a licensed HVAC guy coming out tomorrow to...

I have a licensed HVAC guy coming out tomorrow to check out my unit and make sure its up to spec. I did pull a piece of this insulation board like stuff off the top of my unit between it and the...
11-06-03, 09:39 PM
Replies: 14
Views: 6,873
Posted By x_789

A main pipe with the flex junk coming off the...

A main pipe with the flex junk coming off the sides. I do have good presure in all my vents at each end of the home.

Dont have a probe so I can't tell you on that the unit says a 25-55 rise is...
11-06-03, 09:26 PM
Replies: 14
Views: 6,873
Posted By x_789

Ok air going into the return is showing 78-80...

Ok air going into the return is showing 78-80 with a raytec infered tempgun. Coming from my closes vent its reading around 117-118 I Cant really get a temp strait off top of unit without removing...
11-06-03, 08:58 PM
Replies: 14
Views: 6,873
Posted By x_789

when you say check it coming out of furnace...

when you say check it coming out of furnace should I chech it at a vent or where?

I looked at the manual today and I was wondering if I could adjust the flame down somehow Since I heard that...
11-06-03, 08:49 PM
Replies: 14
Views: 6,873
Posted By x_789

The way it is setup I only have one filter it...

The way it is setup I only have one filter it pulls from the interior wall that is right next to the furnace which is in the garage. ITs a 14 inch wide unit the manual said I need a 14x25x1 filter. ...
11-06-03, 12:41 PM
Replies: 14
Views: 6,873
Posted By x_789

Furnace makes air smell

I bought a new home last year and the first time I kicked on the furnace I found out the Heat exchnager was shot.. So my home warranty replaced the furnace with a Goodman furnace.. Nothing special...
Replies: 7
Views: 1,386
Posted By x_789

Well the noise only starts under a load. but it...

Well the noise only starts under a load. but it is rythmatic once it starts.. I emptied the oil and it looks fine it was a light tan color no metal or anything.. I dont know guess I will just take...
Replies: 7
Views: 1,386
Posted By x_789

Ok well I looked up the engine on Hondas website...

Ok well I looked up the engine on Hondas website and it states you have to pour out through the dipstick hole. Good thing I checked they now recommend a 10-30 detergent oil where as I always thought...
Replies: 7
Views: 1,386
Posted By x_789

Husky Mower/honda engine makes clanking noise

Hello I bought a husky mower with a Honda 5.5 engine on it start of this season. here is the exact mower Link (http://www.usa.husqvarna.com/Folder_263/node638.asp?id=76) The problem I am having is...
Replies: 21
Views: 1,882
Posted By x_789

If its a Genie opener. And you hold down the...

If its a Genie opener. And you hold down the button on the wall.. This sounds like a Sensor issue. I had the same problem only mine was spratic. Only in the mourning when my wife left for work.....
01-21-03, 02:01 PM
Replies: 23
Views: 2,123
Posted By x_789

OK guys thanks to everyone that helped especially...

OK guys thanks to everyone that helped especially To john your taking the time to give me step by step instructions gave me the motivation to tackel this job. Well you personally save me over 150...
01-21-03, 08:38 AM
Replies: 23
Views: 2,123
Posted By x_789

John I was about to head out the door to buy the...

John I was about to head out the door to buy the new wiring.

Instead is there a way that you can think of that I can install an inline switch in the birdsnest? I have a dummy fixture covering...
01-21-03, 07:38 AM
Replies: 23
Views: 2,123
Posted By x_789

John from my little diagram above where I removed...

John from my little diagram above where I removed black 2 I have black one coming from breaker and black 3 going to switch Blk 2 is still in the box hasn't moved

Now my questions is the first...
Showing results 1 to 25 of 33
 


 
Forum Jump