Search: Posts Made By: eddieo45
Showing results 1 to 10 of 10
Search took 0.01 seconds.
05-12-20, 11:25 PM
Replies: 8
Views: 221
Posted By PJmax

They may have updated the circuit to not require...

They may have updated the circuit to not require a neutral now.
Having a neutral would not be a problem.... it just wouldn't be used.
05-08-20, 03:25 PM
Replies: 8
Views: 221
Posted By joed

It could be the combination dimmer and LED. Some...

It could be the combination dimmer and LED. Some dimmers don't work well with LED and some LED don't dim very well.
05-08-20, 03:25 PM
Replies: 8
Views: 221
Posted By Pilot Dane

I might start looking for a new cordless switch...

I might start looking for a new cordless switch system. 6 years ago LED lights were in there infancy and dimming was almost unheard of so there might be some incompatibility between the switch the...
Replies: 10
Views: 500
Posted By PJmax

Exactly. If you hear the sparking at the...

Exactly. If you hear the sparking at the burner.... it should be visible.
If it's not then it could be getting shorted by crud.

The arrow points to what looks like the igniter. The ports in the...
Replies: 10
Views: 500
Posted By 2john02458

You can pick the slots clean with a toothpick or...

You can pick the slots clean with a toothpick or scrub with a toothbrush--dry or wet with some alcohol or vinegar. Be careful not to dislodge any small parts like the spring.

Sometimes just the...
Replies: 9
Views: 780
Posted By Pilot Dane

Thanks for the warning. My fridge is fed RO...

Thanks for the warning. My fridge is fed RO filtered water so I've never changed the filter. Looks like I should never try.
Replies: 9
Views: 780
Posted By Norm201

I have similar problem. I cannot remove the old...

I have similar problem. I cannot remove the old filter. I've tried everything short of forcing and breaking the unit. This fridge is fairly new, so I'm leaving it alone. And I use to change the...
Replies: 5
Views: 849
Posted By CasualJoe

I am glad you found the Gerber to be to your...

I am glad you found the Gerber to be to your liking, I like them too. The one I have here at home is all brass, but they have since started making them with the actual drain and and overflow of PVC....
Replies: 5
Views: 849
Posted By Pilot Dane

Some overflow tubes had a separate piece that...

Some overflow tubes had a separate piece that held the overflow tightly against the tub while other models relied on the face plate holding everything together. The important thing to remember is...
Replies: 5
Views: 849
Posted By CasualJoe

I believe you'll need to replace the entire tub...

I believe you'll need to replace the entire tub drain/overflow unless you can figure out who the manufacturer is, but I think that would be doubtful. I always look for a good solid brand such as...
Showing results 1 to 10 of 10


 
Forum Jump