Search: Posts Made By: andydhebert
Showing results 1 to 20 of 20
Search took 0.01 seconds.
Replies: 3
Views: 289
Posted By andydhebert

Pulsing pressure on pressure/power washer

Any suggestions?
Video of the problem (https://youtu.be/r8DN_gAdWL8)

Starts and runs well. Hose is new. The tips work on my other washer.

Thanks in advance.
Replies: 15
Views: 7,645
Posted By andydhebert

Springs are all good. Im going to have to find a...

Springs are all good. Im going to have to find a repair manual. Im in Saskatchewan, and we have a short growing season. If i take it in now to be fixed I wont get it back until the end of summer. ...
Replies: 15
Views: 7,645
Posted By andydhebert

I went through the carb thoroughly with cleaner. ...

I went through the carb thoroughly with cleaner. I will pickup a new set of gaskets after work and install them. Doesn't look like a ton of adjustment in this carb, it is very basic. No fuel pump....
Replies: 15
Views: 7,645
Posted By andydhebert

Yes they do go up. If it is in neutral it seems...

Yes they do go up. If it is in neutral it seems to work perfect. Starts first pull, runs pretty smooth. If I put it in gear and hold the tine up it runs fine. The second the tines hit the dirt,...
Replies: 15
Views: 7,645
Posted By andydhebert

There is a hand throttle on the engine, i...

There is a hand throttle on the engine, i basically has high low off. Yes, it does respond on its own to the load - or is supposed to. I cleaned out the springs of the governor and that didn't seem...
Replies: 15
Views: 7,645
Posted By andydhebert

If it helps, this is the engine I am working on: ...

If it helps, this is the engine I am working on:

190cc Gas Engine | Princess Auto...
Replies: 15
Views: 7,645
Posted By andydhebert

Anyone have any ideas? I am still waiting to get...

Anyone have any ideas? I am still waiting to get a carb kit, which I hope to do after work today. I don't believe that is the issue though.
Replies: 15
Views: 7,645
Posted By andydhebert

It idles fast if I poke at the governor spring,...

It idles fast if I poke at the governor spring, but if I put a load on (ie try to till dirt) it goes sluggish immediately then stalls.
Replies: 15
Views: 7,645
Posted By andydhebert

Yes it is. If I wiggle it I can get it to pick...

Yes it is. If I wiggle it I can get it to pick up RPMs, but it doesn't do it own its own.
Replies: 15
Views: 7,645
Posted By andydhebert

Briggs and Stratton 675 stalls under load

Good afternoon All

I am looking for some advice as to where to start with this. I have a Briggs 675 motor on an old rototiller. It starts up perfect, idles perfect, but as soon as I try to till...
Replies: 17
Views: 62,152
Posted By andydhebert

I ended up buying a used motor from someone on...

I ended up buying a used motor from someone on Kijiji. When I opened up the engine, the rod had broken. The parts to replace it weren't easily sourced in my area, and everyone I talked to assured...
Replies: 3
Views: 1,977
Posted By andydhebert

SnoTrac 5HP 5 speed 2 stage snow blower 314 450 502 won't self propel

I was running it this afternoon, got a bit of gravel in it that pinged around so i slowed the engine and it stop right away. Immediatley stoped moving forward or reverse.

Its cold out now, and...
Replies: 17
Views: 62,152
Posted By andydhebert

Thanks for the super quick reply. Can I buy a...

Thanks for the super quick reply. Can I buy a 150 lawn mower with the same series or similar engine and just swap it out? I cant find an engine locally for that price.
Replies: 17
Views: 62,152
Posted By andydhebert

diagnosed

Well gentlemen.. I got back jnto this motor and turns out my connecting rod is snapped. Although Im pretty amateur at this but I dont see any other damage. The oil needs to be changed to get metal...
Replies: 17
Views: 62,152
Posted By andydhebert

I am thinking of pulling it apart and trying to...

I am thinking of pulling it apart and trying to fix it myself. I'm not sure how far I will get.. I imagine the repair shops will charge me deeply just for parts.. but who knows! I'm not in a...
Replies: 17
Views: 62,152
Posted By andydhebert

Still broken

Ok, so I took the plug out and put a screwdriver in - it only goes about 3/4" past the threads and no change and I tug the rope out. Does that say anything?

The local repair shop quoted me $800...
Replies: 17
Views: 62,152
Posted By andydhebert

Still broken

Hey geogrubb

I figured out how to make the videos public now. Never used them before.

I pulled the plug and it doesn't make a difference. Also I have removed the rip cord and determined that...
Replies: 17
Views: 62,152
Posted By andydhebert

Still broken

I figured out how to make the videos public. I think I prefer comments in here.. but whatever - beggars can't be choosers right!

Briggs and stratton. Turning by hand. - YouTube...
Replies: 17
Views: 62,152
Posted By andydhebert

Still not workin

Hey Cheese

Thanks for your response - I am very green to this, so please forgive me if I'm doing this wrong. I removed the 3 bolts that hold the the rip cord on, and here is what I got. ...
Replies: 17
Views: 62,152
Posted By andydhebert

Can't pull starter cord on Briggs and Strattor 500 series, pressure washer

Hi All

This unit has for sure less then 5 hours on it, and it is a year and a half old. I was just using it for a couple hours today. It started first pull since winter storage - no extra pulls...
Showing results 1 to 20 of 20


 
Forum Jump