Search: Posts Made By: k1ngkev1n1
Showing results 1 to 25 of 67
Search took 0.01 seconds.
Replies: 5
Views: 6,315
Posted By k1ngkev1n1

yea the gap above the sliding door, i mean even...

yea the gap above the sliding door, i mean even if i raise the door there still will be a slight gap at the top and the door has weather stripping that runs perpendicular with the door on both the...
Replies: 5
Views: 6,315
Posted By k1ngkev1n1

76388 here is a picture the gap (i circled...

76388

here is a picture the gap (i circled area in red) is maybe 5/8 in high and not sure how wide maybe an inch. Hope this helps.
Replies: 5
Views: 6,315
Posted By k1ngkev1n1

gap at top of sliding door (when closed) between fixed door and movable door?

Like the sliding door doesn't meet the top of the frame or something76387. Not sure what type of weather stripping to use as the sliding door will be opening and closing obviously.

I tried to draw...
Replies: 1
Views: 584
Posted By k1ngkev1n1

removed closet sliding doors now have 3 holes in the laminate flooring....?

So i removed the closet sliding doors and the track that was on the lfoor and under the track there are 3 holes about 4" x 4" squares one on each side and one in the middle. Its a floating laminate...
08-12-16, 04:55 PM
Replies: 7
Views: 867
Posted By k1ngkev1n1

will any all purpose cleaner work like comet? or...

will any all purpose cleaner work like comet? or does it specifically have to be simple green>
08-12-16, 04:41 PM
Replies: 7
Views: 867
Posted By k1ngkev1n1

sorry not at home, but i dont think they have...

sorry not at home, but i dont think they have rollers, was planning on vacuuming out the tracks regardless. really clean it up.
08-12-16, 04:24 PM
Replies: 7
Views: 867
Posted By k1ngkev1n1

Best way to Clean old 1960ish horizontal Aluminum sliding windows...

Ok so i got this condo and the windows are super dirty very old aluminum windows, Im wondering what is the best way to give the windows and sliding balcony doors a good thorough cleaning. They also...
02-12-16, 05:21 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

yea i have to look around as i want to keep the...

yea i have to look around as i want to keep the tile down in cost cheaper the better, but i want it to look decent haha.
02-12-16, 04:52 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

Ahh ok thanks, im kind of anxious and nervous to...

Ahh ok thanks, im kind of anxious and nervous to do the job, if it goes well i will consider tiling my bathroom as well above the sink :)

I will see what Czizzi says assuming he replies/ sees my...
02-12-16, 04:45 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

Excuse my stupidity but what or who is czizzi? ...

Excuse my stupidity but what or who is czizzi?

I will just be installing a vent hood no microwave. the hood goes on right under cabinet ill just measure how low the hood goes im guessing maybe...
02-12-16, 04:31 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

its a plaster wall i dont think its perfectly...

its a plaster wall i dont think its perfectly flat along the wall id say 90% but no major humps and stuff./

do you have a link to any recommended tiles maybe? id like to stick with one tile, as...
02-12-16, 04:20 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

do i tile right onto the wall? or should install...

do i tile right onto the wall? or should install a back board like a think piece of plywood like .25 inch thick? the granite counter part on the wall has a little gap of about 1/4 inch before the...
Replies: 6
Views: 3,373
Posted By k1ngkev1n1

the floor definatly isn't level, its a condo and...

the floor definatly isn't level, its a condo and the inspector noticed that the floors were uneven, but he said its pretty normal for condos that are this old (made in the 1960's). I just dont think...
Replies: 6
Views: 3,373
Posted By k1ngkev1n1

welli dont know when the floor was installed...

welli dont know when the floor was installed probably a while back im guessing. i know under is tile though its a condo. I guess for that area where i removed the cabinet i can alway have a built in...
02-12-16, 04:04 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

here is a picture 62770 Just the area...

here is a picture

62770

Just the area below cabinets and a little bit above the stove as well. Should i wait to put range hood on or do that then tile ?

maybe something relatively cheap like...
02-12-16, 12:19 PM
Replies: 16
Views: 916
Posted By k1ngkev1n1

Tiling my own backsplash?

Ive never done any tiling, and i wanted to get my kitchen backsplash tiled. I read that you can buy some strong glue to install the tiles them grout them. Is that correct?

the area is pretty...
Replies: 6
Views: 3,373
Posted By k1ngkev1n1

Old laminate flooring issue some areas dip down when you step on them...

So i got a condo it had laminate floors they are ikea laminate that they do not make anymore i noticed some spots give and sink in when you step on them. I know below the laminate is tile so not sure...
02-09-16, 03:46 PM
Replies: 9
Views: 1,945
Posted By k1ngkev1n1

it looks loose int he channel wheni move it back...

it looks loose int he channel wheni move it back and forth the glass part.
02-09-16, 01:44 PM
Replies: 9
Views: 1,945
Posted By k1ngkev1n1

Those are the only photos i have at the moment...

Those are the only photos i have at the moment when i get home i will take a picture of the opening, but the opening is almost exactly the width of that window in the picture just straight ahead 8...
02-09-16, 01:15 PM
Replies: 9
Views: 1,945
Posted By k1ngkev1n1

These are two totally different questions... ones...

These are two totally different questions... ones on enclosing the balcony the other is dealing with rattling of the windows, they do have the same picture showing the window that is used throughout...
02-09-16, 12:32 PM
Replies: 9
Views: 1,945
Posted By k1ngkev1n1

the glass itself is not loose.

the glass itself is not loose.
02-09-16, 12:06 PM
Replies: 9
Views: 1,945
Posted By k1ngkev1n1

old 1960s aluminum windows rattle every time i walk by them

I went up to them and when i push them they move back and forth like they are loose or have no cushioning to prevent them from rattling around back and forth. They are pretty old from 1960s anyway to...
Replies: 11
Views: 1,088
Posted By k1ngkev1n1

Yea I have to fill out a form and they need to to...

Yea I have to fill out a form and they need to to have proper insurance as licensed as well. The submit a form with job scope to be approved by board.

the window is pretty old prob original from...
Replies: 11
Views: 1,088
Posted By k1ngkev1n1

Specific type of contractor to look for?

Should i be looking for a specific type of contractor? first time owner never had to do any of this.
Replies: 11
Views: 1,088
Posted By k1ngkev1n1

I believe the windows have to be exactly the same...

I believe the windows have to be exactly the same as the other ones so that the building exterior looks the same. Im not too concerned about climate control as I am in southern california and the...
Showing results 1 to 25 of 67
 


 
Forum Jump