Search: Posts Made By: klawman213
Showing results 1 to 25 of 154
Search took 0.02 seconds.
Replies: 7
Views: 433
Posted By klawman213

Yes, flatcrank. I don't have the manual anymore...

Yes, flatcrank. I don't have the manual anymore but I found a copy on the internet of the "2007 Nissan Service and Maintenance Guide". What is actually says under "Explanation of Scheduled...
Replies: 7
Views: 433
Posted By klawman213

Thank you both. I agree with Maarq1 that the...

Thank you both. I agree with Maarq1 that the fluid should have be changed per OEM recommended service intervals, but that not having been done I will tell my son to take it to an independent...
Replies: 7
Views: 433
Posted By klawman213

CVC Transmission Fluid Change

My boy has a 2007 Nissan Sentra 2.0 with 103,000 miles on it that has never had its transmission fluid changed. It runs fine and does not leak. He doesn't have the manual, but i suspect that the...
10-30-19, 07:25 PM
Replies: 5
Views: 340
Posted By klawman213

Thanks to all. I had the new capacitor tested and...

Thanks to all. I had the new capacitor tested and installed in 10 minutes after it arrived and the ac started right up and ran smooth.
10-28-19, 09:14 PM
Replies: 5
Views: 340
Posted By klawman213

Cool. Thanks to both of you. I guessed but...

Cool. Thanks to both of you. I guessed but wasn't sure that the 8 percenter was actually rated slightly better. Now to see if it starts and if it does if there is any indication of what caused the...
10-28-19, 06:26 PM
Replies: 5
Views: 340
Posted By klawman213

Correct Replacement Run Capacitor

My Lennox gave it up and will not start. The run capacitor is clearly bad. It is very badly domed and I can't get any reading with my meter for either HERM or Fan. So I ordered a GE Gentec 70 mfd...
10-15-19, 05:41 PM
Replies: 5
Views: 618
Posted By klawman213

Since it seems Bullseye 123 is a pretty good...

Since it seems Bullseye 123 is a pretty good product and I noted it took some effort to sand it and the one coat of SW Pro-Classic down to the old oil paint, I elected to simply give everything a...
10-14-19, 06:47 PM
Replies: 5
Views: 618
Posted By klawman213

Thanks XSleeper. I went to the SW store and...

Thanks XSleeper. I went to the SW store and talked with the manager about the Bullseye 123, which I had gotten elsewhere. As for the work painted to date, he explained how to finish it. I asked if...
10-14-19, 02:43 PM
Replies: 5
Views: 618
Posted By klawman213

I am not sure, but think the 123 would work fine,...

I am not sure, but think the 123 would work fine, if the preparation I did was better. In a few spots, when going to lightly sand between top coats with 320, the top coat and the primer comes off...
10-13-19, 06:39 PM
Replies: 5
Views: 618
Posted By klawman213

Zinser Bullseye 123 Primer over Oil Based Paint

Is Bullseye 123 any good for priming old oil base doors and frames? So far I have sprayed half of our interior doors with it and top coated them with SW Pro-Classic, but I have only half finished...
10-08-19, 05:21 PM
Replies: 3
Views: 360
Posted By klawman213

As I thought. I will caulk them. As for not...

As I thought. I will caulk them.

As for not looking at the top, I paid to have a "pro" do the interior downstairs, including the sills of the widows. He didn't expect me to run up the ladder and...
10-08-19, 03:12 PM
Replies: 3
Views: 360
Posted By klawman213

Caulking gap between trim and drywall at top of door frame

This may be more of a painting issue, but in painting the door casings and trim I noticed that when built the gap between the trim running across the top of the door and the drywall was never...
Replies: 7
Views: 478
Posted By klawman213

Yep. You earlier alerted me to the potential...

Yep. You earlier alerted me to the potential problem with those screws stripping, XSleeper. I think I know what I will do. For those I am not taking into the garage and spraying, I will pop the...
Replies: 7
Views: 478
Posted By klawman213

I think they may have originally been painted...

I think they may have originally been painted because the design called for nickel/chrome door handles on one side of some doors and brass on the other. For example, the hall side of a door to a...
Replies: 7
Views: 478
Posted By klawman213

Painting door hinges

How should I paint door hinges without removing them? My hinges were painted with the same paint as the doors and trim by the builder and I am now painting them. I removed the first bath doors and...
10-04-19, 06:28 PM
Replies: 8
Views: 367
Posted By klawman213

I liked the Pro Classic enough to buy enough more...

I liked the Pro Classic enough to buy enough more to do the interiors of the entry doors (can it be done that way?) as well as the rest of the interior doors with some hang tall bb on the second...
10-04-19, 09:13 AM
Replies: 8
Views: 367
Posted By klawman213

As for the cause of my sags and runs, whether...

As for the cause of my sags and runs, whether true or not I read elsewhere that Proclassic can run fairly easily if coats aren't thin. One person ventured that the first top coat should be the...
10-03-19, 05:38 PM
Replies: 8
Views: 367
Posted By klawman213

Good suggestion. I actually got a trouble light...

Good suggestion. I actually got a trouble light hung where I sanded the run down, but should have used it as I sprayed to check for runs as I found some on another door located in a poorly lit and...
10-03-19, 12:49 PM
Replies: 8
Views: 367
Posted By klawman213

U folk told me what the paint store guy said. ...

U folk told me what the paint store guy said. Just sand the runs down as best I can and do the top coat. I will just spray the finish coat and take care to put down 2 light coats.

They got...
10-03-19, 12:14 PM
Replies: 8
Views: 367
Posted By klawman213

Paint sags filling "grain" in doors

What can I do about paint runs/sags filling in the valleys of faux grain stamped into the skins of hollow core interior doors? The paint sprayed 3 days ago is Bullseye 123 waterborne primer. A guy...
Replies: 7
Views: 926
Posted By klawman213

Marksr's head mask suggestion was a good one. ...

Marksr's head mask suggestion was a good one. Instead of scrubbing paint out of my hair I just had to scrub a small area of my face. The part still not covered by the n95. As for the amount of...
Replies: 7
Views: 926
Posted By klawman213

Thanks all. I will at least get a couple of...

Thanks all. I will at least get a couple of paper n95 masks, if not the respirator flagged by Marq1. I may spring for the respirator as I may need it down the road and I only have one set of lungs...
Replies: 7
Views: 926
Posted By klawman213

Respirator needed for small project

I will be spray painting latex inside a booth set up inside of my garage and am considering if I need some kind of respirator I am guessing it depends to a degree how long I will be spraying and I...
09-13-19, 04:30 PM
Replies: 4
Views: 542
Posted By klawman213

I confused this, but those are instructions from...

I confused this, but those are instructions from a different manufacturer of fleximobile molding. Mine says nothing about crinkling or painting before installation, but just to paint like it was...
09-13-19, 10:04 AM
Replies: 4
Views: 542
Posted By klawman213

Thanks XSleeper. The manufacturer of the stuff I...

Thanks XSleeper. The manufacturer of the stuff I received actually recommends that PL for those using adhesive. The only thing different I am going to do is not paint it prior to installation. ...
Showing results 1 to 25 of 154
 


 
Forum Jump