Search: Posts Made By: kjh9835
Showing results 1 to 25 of 44
Search took 0.02 seconds.
Replies: 5
Views: 2,305
Posted By kjh9835

lid lock issues

So I finally figured out the sequence of flashing LED's and still no luck getting the lid to actually lock in place. Can anyone tell me if the plastic piece on the inside of the lid that locks into...
Replies: 5
Views: 2,305
Posted By kjh9835

No instructions with lid lock mechanism

Lid lock had no instructions, I have already located the tech sheet, that is how I attempted to read the error codes. So tonight I discover I have to calibrate the machine first then do auto test. It...
Replies: 5
Views: 2,305
Posted By kjh9835

Kenmore VMW lid lock problem Model No. 110.21302013

I searched for VMW and the model number, got a few leads but nothing that helped.

I replaced the lid lock mechanism after someone tried to open the washer before cycle was complete. I took apart...
05-16-14, 05:41 AM
Replies: 3
Views: 2,309
Posted By kjh9835

Thanks marksr for the reply. Me either on the...

Thanks marksr for the reply. Me either on the particle board, pretty much a waste on furniture that gets used a lot.

They are particle board same as the apron boards so I planned to use metal...
05-15-14, 09:36 PM
Replies: 3
Views: 2,309
Posted By kjh9835

4x4 table legs, particle board and replacing the apron on a table

The top and apron are particle board, the legs are tapered 4x4 posts that are held in place with screws and an angled piece of wood that also joins the corners of the table. The screws are large/long...
10-20-13, 08:17 PM
Replies: 2
Views: 1,153
Posted By kjh9835

Thanks, I can borrow a palm sander from a friend...

Thanks, I can borrow a palm sander from a friend so I'll try that later this week when I get back to the seats. Next two days are scheduled for car repairs....yuck
Kathy
10-20-13, 06:04 AM
Replies: 2
Views: 1,153
Posted By kjh9835

Question Saddle seat or Windsor chair seat: need sanding advice

I did a search for both saddle seat and Windsor chair but amazingly there were no results for either.

I am making two saddle seat bar stools out of 2x12's to match the "bar-like" table I made for...
06-09-12, 08:44 AM
Replies: 11
Views: 3,577
Posted By kjh9835

Thank you both again. Ended up having company...

Thank you both again. Ended up having company yesterday and only got the two toy boxes completed. I will prob. start on the chest/coffee table tomorrow as I have some sewing/mending to do for dtr who...
06-07-12, 08:40 PM
Replies: 11
Views: 3,577
Posted By kjh9835

Sorry, let me clarify on the coffee table/blanket...

Sorry, let me clarify on the coffee table/blanket chest:

Lightly sand the tops with 220 grit sandpaper, clean really well with mineral spirits and a white towel to remove any build up of furniture...
06-07-12, 11:08 AM
Replies: 11
Views: 3,577
Posted By kjh9835

On the "fisheye" issue (I just read about it),...

On the "fisheye" issue (I just read about it), here's what I found:

"There are three ways to deal with silicone contamination: Wash the wood many times with a strong detergent or solvent such as...
06-07-12, 10:55 AM
Replies: 11
Views: 3,577
Posted By kjh9835

Thank you both for your replies and advice. I...

Thank you both for your replies and advice. I have used furniture polish on the coffee table, etc so I'll be sure to sand it well. I have a variety of grits of sandpaper both for the belt sander and...
06-06-12, 05:09 AM
Replies: 11
Views: 3,577
Posted By kjh9835

2 questions about clear poly finish

#1) Back in 2008, I used separate cherry stain and clear poly on my blanket chest, coffee table and two end tables. The coffee table gets alot of use. I am thinking of giving another protective coat...
08-13-11, 05:45 AM
Replies: 8
Views: 1,830
Posted By kjh9835

Its about 6 1/2 feet above the floor and I have...

Its about 6 1/2 feet above the floor and I have 10 foot ceilings, not likely to get bumped but possible. The holes are also directly below a metal cover for the furnace ductwork so to get a stronger...
08-12-11, 04:44 PM
Replies: 8
Views: 1,830
Posted By kjh9835

No Durabond here in town but going to larger town...

No Durabond here in town but going to larger town tomorrow. Guy at Ace Hardware here in town said he had something better....a piece of patching screen. Mud edges of hole, cut screen to fit a bit...
08-10-11, 06:32 PM
Replies: 8
Views: 1,830
Posted By kjh9835

The actual "holes" are about the size of a half...

The actual "holes" are about the size of a half dollar and the larger maybe my fist but if I remove all the loose pieces I tapped back in then the area will be about a foot square including the...
08-07-11, 01:31 PM
Replies: 8
Views: 1,830
Posted By kjh9835

Oops: plaster wall repair advice needed

While attempting to move a freestanding laminate closet to another room, I could not figure out why it was so heavy. Finally got a kid to help me and realized too late that spouse had used an "L"...
07-07-11, 05:15 PM
Replies: 8
Views: 15,244
Posted By kjh9835

marksr....that's what the big box store guy said,...

marksr....that's what the big box store guy said, find a cabinet maker or woodworker as you only need a scrap piece. I'm gonna check with the maintenance guy at work tomorrow and see if he has...
07-07-11, 07:31 AM
Replies: 8
Views: 15,244
Posted By kjh9835

Thank you for your replies. Can you buy just a...

Thank you for your replies. Can you buy just a small piece of something 3/4" thick? I was thinking of "craft" type wood that you can get piece by piece but it's pretty thin and soft so prob. not the...
07-07-11, 05:55 AM
Replies: 8
Views: 15,244
Posted By kjh9835

Door jamb repair with wood filler, do I need additional wood?

The total area that need filled is 4" high, 1 1/2" wide with varying depths, the deepest is 1".

Very old house, repaired before by previous owners with unknown filler except I did pull out some...
Replies: 2
Views: 4,342
Posted By kjh9835

The septic tank checked out fine but there was an...

The septic tank checked out fine but there was an obstruction in the line from the house to the overflow and I had to call Roto-Rooter to come and clear it.

Per the septic company, the other...
Replies: 2
Views: 4,342
Posted By kjh9835

Toilet gurgling when washer drains

I have two questions:
1) Whenever the washer drains, I hear and see gurgling in the bowl of the toilet. Kind of like bubbles in a glass of milk with a straw but really large air bubbles. I don't...
Replies: 3
Views: 12,127
Posted By kjh9835

I've gotten most of the walls clean and started...

I've gotten most of the walls clean and started the trim and manual rolling. The DR is almost done. Since we have until the end of March to get moved, I'll just do it all manually instead of wasting...
Replies: 3
Views: 12,127
Posted By kjh9835

Power paint roller?

I've read several postings from the past year about different types of sprayers and have decided that is not what I want to purchase or even rent due to the overspray issue and "floating paint" into...
Replies: 3
Views: 2,371
Posted By kjh9835

That was an easy answer, the end tables are not...

That was an easy answer, the end tables are not that big so I'll just take one of them with me and see what comes close to the color. Why didn't I think of that?

The stuff on the shelves at the...
Replies: 3
Views: 2,371
Posted By kjh9835

Stain doesn't match

Last Summer I stained a trunk, coffee table and two end tables to match. Spouse built them with supplies given to us by a co-worker but I don't know what type of wood it is other than cherry veneer...
Showing results 1 to 25 of 44
 


 
Forum Jump