Go Back

DoItYourself.com Community Forums > Interior Flooring, Floor Coverings and Coatings Center > Solid Hardwood, Engineered and Laminate Flooring

Reload this Page

>

Which underlayment??

Which underlayment??

Closed Thread

Search this Thread

#1

Old

02-27-04, 07:45 AM

Scott2589

Visiting Guest

Posts: n/a

Question

Which underlayment??

I will be installing Wilsonart laminate flooring soon in my kitchen, hall, and laundry room. I have been looking at Quiet Walk underlayment, can I use this or do I need to use a Wilsonart brand?

Upvote

#2

Old

02-27-04, 10:16 AM

florcraft

Visiting Guest

Posts: n/a

If you want your warranty, use W/A brand

Upvote

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Solid Hardwood, Engineered and Laminate Flooring
Filling gaps between softwood floor boards

on Jul 06, 2001

I want to paint the softwood floors in my old house. They are in rough shape but until the rest of the house in renovation I won't be doing anything with the floors. Until then I just want to give them a coat of paint to look good. But the boards have shrunk over the many years and I am thinking of filling in between the boards before painting. I am hoping to find a substance that is non-toxic to people and pets, paintable, and somewhat flexable (as the boards do move slighty, and expand and contract depending on the weather). Any recommendataion? Thanks, Terry Halifax, Nova Scotia, CANADARead More
Solid Hardwood, Engineered and Laminate Flooring
Should I rip off a layer?

V

VaDIYguy on Feb 26, 2004

I will soon be putting in new laminate tile floors in my kitchen. Today, I took out my dropin stove for replacement with a freestanding model. Under the drop in was bare plywood about 3/8 - 1/2" lower than the rest of the floor. Reason being, there is an old layer of vinyl another thin (1/4 or 3/8") layer of plywood followed by the current layer of vinyl. My question is whether I should rip up a layer of flooring, the current vinyl plus the thin plywood, before putting down the new laminate flooring. I was thinking it may save me from notching door casings, shaving door bottoms, and modifying my cabinets over the fridge to accomodate the new higher floors. How hard is it to rip up plywood like this and what's the right tool? I figured a crowbar and some brawn??? thanks!Read More

Ask a Question