hole measurement

Old 02-26-07, 07:41 AM
Thread Starter
Join Date: May 2005
Posts: 88
Upvotes: 0
Received 0 Upvotes on 0 Posts
hole measurement

I'm installing wide pine a a small bathroom in my kitchen area. One board will require cutouts for the sink and toilet. What would be the best technique to accurately measure the placement of all cuts. I was planning on cutting them with hole saws and don't want any mistakes as this stuff is not cheap.

Old 02-27-07, 04:21 AM
Join Date: Oct 2006
Location: Wilmington
Posts: 3,994
Upvotes: 0
Received 0 Upvotes on 0 Posts
I usually avoid measurements in this situation. When my floor reaches that point, I mark the locations on the board, in the exact position it will occupy.
Old 02-27-07, 03:28 PM
Join Date: Nov 2000
Location: Austin, TX
Posts: 4,857
Upvotes: 0
Received 0 Upvotes on 0 Posts
A tape measure is your best friend.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: