Expansion gap for Swiftlock Laminate
#1
05-22-08, 01:34 PM
Expansion gap for Swiftlock Laminate
Hello, my question is this...The paperwork that came with boxes of flooring says to maintain a 3/8" expansion gap, website says to maintain 1/4" expansion gap.
What if due to my inability to measure correctly and cut straight lines
some of the pieces are 1/4" gap and some may be closer to 3/8" gap? There is at least a 1/4" gap between all end/side boards.
Will this cause any problems after I put down the quarter round? I guess I should have asked this earlier as I'm almost done with install and I realllly don't want to have to pull up floor and recut boards. Please help! Thanks
What if due to my inability to measure correctly and cut straight lines
some of the pieces are 1/4" gap and some may be closer to 3/8" gap? There is at least a 1/4" gap between all end/side boards.Will this cause any problems after I put down the quarter round? I guess I should have asked this earlier as I'm almost done with install and I realllly don't want to have to pull up floor and recut boards. Please help! Thanks
Last edited by webrik33; 05-22-08 at 02:27 PM.
#2
05-22-08, 04:17 PM
Banned. Rule And/Or Policy Violation
Join Date: Jul 2006
Location: USA
Posts: 7,754
Upvotes: 0
Received 0 Upvotes
on
0 Posts
