polyurethane finish patch?
#1
Member
Thread Starter
Join Date: May 2007
Posts: 14
Upvotes: 0
Received 0 Upvotes
on
0 Posts
polyurethane finish patch?
Hello,
I recently installed, sanded and finished about 500 sqft of unfinished red oak T&G flooring. I just applied the final coat of polyurethane (Minwax Fast Drying Polyurethane, satin finish).
Everything looks great except for a small section about 1' x 1', which has some bubbles. I sanded it lightly with 220, and want to repair it. what is the best way to blend it?
thanks in advance!
I recently installed, sanded and finished about 500 sqft of unfinished red oak T&G flooring. I just applied the final coat of polyurethane (Minwax Fast Drying Polyurethane, satin finish).
Everything looks great except for a small section about 1' x 1', which has some bubbles. I sanded it lightly with 220, and want to repair it. what is the best way to blend it?
thanks in advance!
#2
Forum Topic Moderator
You can't effectively blend in the poly. What you sould do is poly completely each affected board - just to the next joint. It may show for a little while but it will blend in given a little time.