Laminate in Mfg. Home
#1
Member
Thread Starter
Join Date: Jan 2009
Location: USA
Posts: 26
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Laminate in Mfg. Home
Want to install 850+ feet of laminate flooring in my 3 year old "double-wide" home.
Solid with no shifting at this point (on concrete runners foundation).
My question: do I need to lay the laminate across the "marriage" seam of the home's two halfs or can I run in the same direction of the seam (length wise)?
Floor is absolutely level the entire width of home with no part of the seam raised.
Thanks.
Solid with no shifting at this point (on concrete runners foundation).
My question: do I need to lay the laminate across the "marriage" seam of the home's two halfs or can I run in the same direction of the seam (length wise)?
Floor is absolutely level the entire width of home with no part of the seam raised.
Thanks.
#3
Member
Thread Starter
Join Date: Jan 2009
Location: USA
Posts: 26
Upvotes: 0
Received 0 Upvotes
on
0 Posts
T Mold
So, the T-Mould is what I use as the transition strip?
Jeff