Transition: 3/8" Eng. Hardwood to 1/4" carpet ON SLAB
#1
Member
Thread Starter
Join Date: Mar 2008
Posts: 7
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Transition: 3/8" Eng. Hardwood to 1/4" carpet ON SLAB
Another transition question folks. It's a unique one for sure:
- Concrete basement installation.
- 3/8" engineered hardwood glue-down.
- 1/4" berber glue-down (no padding at all).
I need to transition the eng. hardwood to the carpet.
The carpet edge is jagged, within a 1/4" inch, so I need the
trim piece to overlap ... not butt.
I can't do a trackless transition because of the concrete,
and all the track type transitions are made for *3/4* hardwood
not 3/8's.
I've been to HD, Lowes, Menards looking for anything that
will work - no luck.
Help.
- Concrete basement installation.
- 3/8" engineered hardwood glue-down.
- 1/4" berber glue-down (no padding at all).
I need to transition the eng. hardwood to the carpet.
The carpet edge is jagged, within a 1/4" inch, so I need the
trim piece to overlap ... not butt.
I can't do a trackless transition because of the concrete,
and all the track type transitions are made for *3/4* hardwood
not 3/8's.
I've been to HD, Lowes, Menards looking for anything that
will work - no luck.
Help.