HI & Help

Reply

  #1  
Old 08-29-09, 06:52 PM
Member
Thread Starter
Join Date: Aug 2009
Location: Alabama
Posts: 1
HI & Help

Hi, I just joined this group.
I am a floor covering installer in S.Alabama.

We just started selling and installing Laminate.
Have done 3 small jobs, that look great.

Ok my question is, when doing, joining rooms is it best to put T mold in the door ways.
And, I have a job coming up, lady is doing her whole house, again about T mold.

I have asked the different people that we buy our laminate from what they think and the only thing is don't run a line over 30 to 40 ft with out a T mold.

Thanks, cuzzx
 
Sponsored Links
  #2  
Old 08-29-09, 07:08 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,968
I would have to agree with the t molding when changing rooms. It additionally gives you the option of rotating the grain for an emphasis should the customer desire it.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'