Expansion Gap in Powder Room Flooring--What to do?

Reply

  #1  
Old 09-26-12, 05:52 PM
Member
Thread Starter
Join Date: Sep 2012
Location: USA
Posts: 1
Expansion Gap in Powder Room Flooring--What to do?

Hi, all. I am running into a bit of trouble with installing baseboard moulding in our powder room as the expansion gap on one of the walls is 5/8 wide and deep. When placing the moulding up against the wall, it isn't flush with the other moulding because it sinks down, even with the quarter shoe moulding. My question is should I place something underneath the baseboard moulding to level it out or just attach the quarter shoe moulding and attempt to nail it into the wall that way?

Thanks for helping a newbie out
 
Sponsored Links
  #2  
Old 09-27-12, 06:39 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,968
Welcome to the forums! Maybe you could help tired eyes and brains to understand what you are up against by posting a couple of pictures of what your problem is. Are you putting this molding up against concrete?? http://www.doityourself.com/forum/el...your-post.html
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes