What tools do you use to cut already laid hardwood flooring

Reply

  #1  
Old 09-26-13, 03:20 PM
Member
Thread Starter
Join Date: Jun 2013
Location: USA
Posts: 14
What tools do you use to cut already laid hardwood flooring

Hi Folks,

I need to cut through 3/4 inch oak flooring which has already been laid to make some repairs. What are the tools you use to make these cuts? I have a wormdrive Skil saw which I trust to do just fine on the big cuts. But I'm not sure how to handle the more precision cuts that the saw won't be able to reach.

I've seen some video of people using a multitool? Any suggestions are sincerely appreciated.
 
Sponsored Links
  #2  
Old 09-26-13, 03:24 PM
Group Moderator
Join Date: Oct 2004
Location: WI/MN
Posts: 18,651
Mutlitool was my first thought. Fein makes pretty much the top of the line one, the MultiMaster, but a lot of people say the Harbor Freight one is a pretty good alternative at a much lower price.
 
  #3  
Old 09-26-13, 03:32 PM
Banned. Rule And/Or Policy Violation
Join Date: Apr 2013
Location: USA
Posts: 4,297
I have 2, of the Rockwell Multi masters and love them.
Going to need to make two cuts down the middle about 3/4" apart, the oscillating saw will make the short end cuts and finish out where the ciruler saw can not cut to the 2, ends.
I stand on a short piece of 2 X 4 to act as a guide when making the plunge cuts.
 
  #4  
Old 09-26-13, 05:54 PM
Member
Thread Starter
Join Date: Jun 2013
Location: USA
Posts: 14
Thanks mitch and joe, I'll look into a multitool.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes