Replacing rug with laminate questions

Reply

  #1  
Old 10-11-17, 02:56 PM
Member
Thread Starter
Join Date: Oct 2017
Posts: 1
Replacing rug with laminate questions

Good afternoon,

I want to install laminate (pergo I guess) to replace my carpet in the living room and dining room. First idiot question is what do I do with my stuff that is in the room already. I don't have the room to really move all my stuff to another room. I was thinking I could move stuff to one half of the house/room and when the opposite side is done then I can move all my stuff stuff to the newly completed side but I am concerned that the floor will not properly sit correctly. Thoughts or suggestions would be greatly appreciated.
 
Sponsored Links
  #2  
Old 10-11-17, 03:02 PM
Banned. Rule And/Or Policy Violation
Join Date: Sep 2017
Location: USA
Posts: 517
It can be done that way but it sure makes the job slower. Can you move some of it outside or to a garage?
 
  #3  
Old 10-11-17, 03:23 PM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 2,375
That is how I do rooms with big furniture, a pain, but something that you have to deal with!
 
  #4  
Old 10-14-17, 07:02 AM
Shadeladie's Avatar
Super Moderator
Join Date: Jan 2005
Location: USA
Posts: 3,871
A neighbor rented a UHaul truck and put everything in there.
 

Last edited by Shadeladie; 10-14-17 at 07:25 AM.
  #5  
Old 10-14-17, 09:26 AM
sam floor's Avatar
Forum Topic Moderator
Join Date: May 2010
Location: floor installer
Posts: 848
On a nice day, we just set in in the yard.
 
  #6  
Old 10-14-17, 02:16 PM
Member
Join Date: Sep 2014
Location: USA
Posts: 486
Pick up some furniture sliders. Some have plastic bottoms for sliding over the carpets. Some of these also come with a carpet type padding which you can cover the plastic side with when you have to slide the furniture over the laminate. If you have really heavy pieces you can put these on furniture dollys that you can roll around the room to move them out of your way.
 
  #7  
Old 10-15-17, 08:22 AM
czizzi's Avatar
Forum Topic Moderator
Join Date: Jul 2007
Location: USA
Posts: 7,124
I work alone, so it is furniture sliders and a hand truck. Move everything as far away as possible, begin installation of the floor. When you have sufficient flooring installed, start transferring furniture over to the other side. Be very cautious not to crush the click lock mechanism on your flooring. Use cardboard or scraps of flooring to protect the live edges. Particularly important for heavy things like refrigerators and stoves.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'