Parquet overlay
#1
Member
Thread Starter
Join Date: Mar 2018
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Parquet overlay
Hi people
just a couple of questions i would appreciate some experienced advice in
1 can you lay 10mm parquet overlay blocks directly onto concrete like you can the 22mm blocks? If not why?
2 is it best laying unfinished or prefinished parquet blocks for cost? Finish?
Thanks
j
just a couple of questions i would appreciate some experienced advice in
1 can you lay 10mm parquet overlay blocks directly onto concrete like you can the 22mm blocks? If not why?
2 is it best laying unfinished or prefinished parquet blocks for cost? Finish?
Thanks
j
#3
Member
Is this below grade, bathroom,or kitchen?
If so I would not do it for several reasons.
One wet event and it can be trashed.
That type flooring needs a perfectly flat surface, concrete almost never is.
Unless I was going for the 70's look I'd avoid it.
If so I would not do it for several reasons.
One wet event and it can be trashed.
That type flooring needs a perfectly flat surface, concrete almost never is.
Unless I was going for the 70's look I'd avoid it.
#4
Member
Thread Starter
Join Date: Mar 2018
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
https://www.directwoodflooring.co.uk...-flooring.html
https://www.directwoodflooring.co.uk...-flooring.html
first link is 10mm blocks
secind link is 22 mom blocks
apparantky 22mm Ines can defiantly be laid into resonantly level and flat concrete
some mixed messages about the 10mm ones
https://www.directwoodflooring.co.uk...-flooring.html
first link is 10mm blocks
secind link is 22 mom blocks
apparantky 22mm Ines can defiantly be laid into resonantly level and flat concrete
some mixed messages about the 10mm ones