How to make sanded & wood-scraped floor areas look the same

Reply

  #1  
Old 11-19-18, 02:07 PM
Member
Thread Starter
Join Date: Nov 2018
Posts: 1
Received 0 Votes on 0 Posts
How to make sanded & wood-scraped floor areas look the same

Hello. I'm refinishing an old hardwood floor staircase in my home. On the stairs, I used a beltsander 80 grit for the bulk of it. On the edges/corners I used a wood scraper.

On the landing, I used a beltsander 80 grit, and wood stripper along the edges. As you can see in the pics, the problem is that it's obvious where different tools were used. I plan on staining it, and am shooting for "good enough" results. To make it more uniform, I was thinking of using 80 grit on the edges with my vibrating hand sander and then sanding it all up to 100 grit or even higher. Am I going in the right direction here or will I be crying later? I've never done anything like this before.

Thanks!

Images here... https://postimg.cc/gallery/2gavsgu9a
 
Sponsored Links
  #2  
Old 11-19-18, 02:45 PM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 46,427
Received 156 Votes on 138 Posts
You've got a lot more sanding to do! 100 or 120 grit should be fine enough for the final sanding before staining.
 
  #3  
Old 11-19-18, 02:50 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 23,800
Received 285 Votes on 261 Posts
The thing that will make you cry is the sheer amount of sanding you will need to do. I sure hope you are staining that wood a dark color. You will need lots of sanding and lots of different sanders, because you need to sand right up to every edge. Sanding would be a little easier if the ballusters could be removed. But you have a TON of work ahead of you. IMO everything should be evenly sanded with 80 grit and then you need to spend an equal amount of time with 100... likely up to 120.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: