Restaining engineered hardwood floor

Reply

  #1  
Old 05-16-19, 07:45 PM
M
Member
Thread Starter
Join Date: May 2019
Location: USA
Posts: 33
Received 0 Votes on 0 Posts
Restaining engineered hardwood floor

Hello. I just bought a house which needs a little renovation. I will start with refinishing the hardwood flood that the house is covered with in 85%. I would like to restain it with a light color, preferably light grey. The floor was replaced in 2007. It is laid in diagonal pattern.

Here are some details:

Species: Oak
Thickness: 3/8 Inch
Width: 3 Inch
Install Type: Glue Down or Staple Down or Nail Down
Grade: 3-Ply
Construction: Engineered
Edge Type: Eased Edges/ Square Ends

I sanded the the plank a little bit using a hand sander with 80 grit paper (took me about 3 minutes to get the stain layer off from that little piece), the wood is still very smooth and kinda slick.

Do you think that its suitable for sanding and restaining?
What type of sander (drum / orbital) and grit would you recommend?

Name:  f1.jpg
Views: 76
Size:  69.6 KB

Name:  f2.jpg
Views: 83
Size:  65.0 KB

Name:  f3.jpg
Views: 79
Size:  67.7 KB

Name:  f4.jpg
Views: 74
Size:  28.6 KB

Name:  f5.jpg
Views: 73
Size:  61.3 KB

Name:  f6.jpg
Views: 79
Size:  100.6 KB

Name:  f7.jpg
Views: 80
Size:  29.5 KB
 

Last edited by PJmax; 05-17-19 at 11:46 AM. Reason: resized pictures/added enlarged view
Sponsored Links
  #2  
Old 05-17-19, 02:30 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 47,545
Received 300 Votes on 266 Posts
Welcome to the forums!

That type of flooring isn't really suitable for sanding and refinishing. You only have a thin layer of wood on top and once you sand thru it the flooring is junk. A very light sanding and a fresh coat of poly is the most you can do. That type of flooring isn't made for refinishing.
 
Bud9051 voted this post useful.
  #3  
Old 05-17-19, 06:36 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 6,398
Received 356 Votes on 332 Posts
It looks like it's solid, really depends on the thickness of the top layer!
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: