Venmar Constructo 2.0 Remote
#1
Member
Thread Starter
Join Date: Dec 2011
Location: United States
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Venmar Constructo 2.0 Remote
Hi, I wired a Venmar Constructo 2.0 HRV to its remote and the HRV will turns on and will not turn off. I wired G to G and B to B. The control on the HRV has a 3 position toggle for hi low and remote (off). With the remote wired in, it stays on no matter what the toggle switch position is in. But when I take the remote off of the control board, the toggle switch starts working. Does this mean that the remote is broken? Also I measured the voltage on B and G when I was switching the controls on the remote and the voltage stayed constant, about 14v.