Can't see ventilation settings on virtual prestige iaq with gateway thm6000r1002
#1
Member
Thread Starter
Join Date: Nov 2016
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Can't see ventilation settings on virtual prestige iaq with gateway thm6000r1002
I just installed the Honeywell gateway thm6000r1002 and hooked up my 3 prestige iaq thermostats. All went as expected and I could all the settings on the virtual thermostat including my Dehumidification settings. I then added a ventilation option to a thermostat and can control that with the Physical thermostat but I can not see a ventilation tab on the virtual thermostat. I tried deleting the thm6000r1002 from the thermostat and adding it back but there is still no ventilation tab on the virtual thermostat. Is it even possible to get this tab on the virtual thermostat ?
Thanks in advance.. Rich..
Thanks in advance.. Rich..