Replace sink flange in basin
#1
04-14-04, 09:21 AM
Replace sink flange in basin
I have the part and it threads in. But how do I take the old one out? Is there a special tool?
#2
04-14-04, 01:07 PM
Member
Join Date: Aug 2003
Location: KY/OH
Posts: 3,362
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Are you describing a pop-up assembly in a regular vanity/lavatory?
If so, remove the nut underneath that holds the assembly together, then wind down nut to the pop-up rod nut.
Push the assembly up, take a pair of channel locks and hold on to the flange part while twisting the assembly below, this might take some muscle to come apart.
If so, remove the nut underneath that holds the assembly together, then wind down nut to the pop-up rod nut.
Push the assembly up, take a pair of channel locks and hold on to the flange part while twisting the assembly below, this might take some muscle to come apart.
