12 inch toilet into 10 inch rough in ?
#1
12 inch toilet into 10 inch rough in ?
Is this possible? Is there some type of adapter out there that will allow us to get our 12 inch toilet to fit in the 10 inch rough in?
Thanks
Thanks
#3
Click on the site below to get some feedback on what Ed suggested.
http://www.bobvila.com/wwwboard/messages/90461.html
Good luck on your project.
http://www.bobvila.com/wwwboard/messages/90461.html
Good luck on your project.
#4
Why change it, there are plenty of toilets out there that can be 10" set. beside offset flanges are against codes, they will leave a ledge just waiting to cause plug ups.
#5
Thanks All
Well, I found a toilet with a 12 inch rough in , but when pushed all the way up against the wall it measures around 10 1/2 - 10 3/4 to center of closet flange - so hopefully I will be able to make this fit without using any adapter etc. and since the opening is 3 - 4 in and the toilet trap is only 2 in. - this should allow for some movement.
I will keep you posted once I attempt to install.
Be for now
I will keep you posted once I attempt to install.
Be for now