When I run my shower it leaks in the basement around the base between the drain and the subfloor. The subfloor is rotting. I had the fiberglass one peice shower installed recently and everything worked fine for a year. It is now leaking in the basement. I tried putting putty around the upstairs part of the drain but it still leaks. Can anyone help please. Thanks!

Hello, looking for a little knowledge on Milwaukee faucet stems. I have a shower/tub that has the above mentioned stems, model 4S-2H and 4S-2C numbers. When I bought the house a year and half ago, the knobs turned around and around, never knowing where the off position was. So, I replaced both the stems with the model numbers mentioned above. Guess what, they broke again and after a few uses. The stem is designed to only turn 90 deg, (full on and off) and is made of plastic of some kind. There is a small shaft (made of plastic , of course:wall: ) that slides in a groove that stops the stem for the on and off position. This shaft keeps breaking. So, I was wondering is anyone else has encountered this issue and if so how did they address it? I would love to buy a metal one, thinking it will last longer. Anyone know of one? My last resort is to replace the entire faucet, as there is no access panel and would require a little more work. Thanks!!!!!