Old laundry sink/ faucet replacement

Reply

  #1  
Old 02-08-16, 08:31 PM
Member
Thread Starter
Join Date: Oct 2015
Location: Canada
Posts: 8
Old laundry sink/ faucet replacement

Ive got this old laundry sink / faucet setup that doesn't work so well so trying to replace the taps.
It would appear as though the threads where it connects vertically were solder together.
How would I go about replacing these? Cut the copper pipe and start from scratch?
Ideally I'd like to have the pipes come out horizontal for the taps I want to use.

Keep in mind I'm a beginner with plumbing!

Name:  1.jpg
Views: 278
Size:  49.1 KB

Name:  1a.jpg
Views: 205
Size:  25.7 KB
 

Last edited by PJmax; 02-09-16 at 10:01 AM. Reason: reoriented pictures
Sponsored Links
  #2  
Old 02-09-16, 01:08 AM
Temporarily Suspended
Join Date: Jul 2008
Location: NY
Posts: 10,986
It might have been soldered because it leaked. So starting from scratch would be the best idea. Sharkbite couplings may make the job easier but you still may have to sweat a few joints.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes