Shower Drain Too High

Reply

  #1  
Old 01-09-17, 06:45 AM
E
Member
Thread Starter
Join Date: Jan 2017
Location: Canada
Posts: 1
Received 0 Votes on 0 Posts
Shower Drain Too High

A client has a one piece shower stall installed on concrete in their basement. The drain pipe was not cut to meet the shower stall drain opening and therefore sits above the actual shower stall drain. Obviously water collects at this point and does not properly drain. Is there anything i.e. a flange, that can be installed around the drain pipe between the drain and actual stall itself to reduce the collection of water. I know cutting the drain pipe itself is the optimum answer however at this time I will say that is not an option.
Thank you
 
Sponsored Links
  #2  
Old 01-09-17, 06:49 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 23,744
Received 631 Votes on 583 Posts
If the pipe is too high for the pan to drain adding a ring around it will just make the water collect further away. The shower pan needs to be raised or the drain pipe cut the proper height.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: