Hi all, replacing the floor in the basement and I encountered this interesting set up which I've never seen before (pic below). It seems to be lead wrapped around a copper ring. The closet bolts were sort of jimmied between the lead and the ring (one had popped out over time it seems as it spun freely when I tried to unscrew the nut). I will be installing ditra and then porcelain over it and had planned on just using a flange extender but I've never come across this particular set up and am now uncertain if that will work. Can anyone more knowledgable recommend how to proceed in this case? I can't even see how the flange is attached to the subfloor. As far as I can tell, it's just the weight of the pipe holding it down. Thanks.

Hello - I have a Shower/Tub combo and recently my tub spout has been dripping a little water. Not a consistent drip. Just a little water appears in my tub every day. I have replaced both the cartridge assembly and tub spout but a little water still appears. Does anyone have any idea as to what is causing this and how I can fix it? I even had my water pressure checked and it is within the set pressure limits. I have a Delta Monitor 14 Series Valve - Model#: T14051 ([url]http://www.deltafaucet.com/bath/details/T14051.html[/url]) with the following Cartridge Assembly - 1300/1400 Series ([url]https://www.deltafaucet.com/repairparts/details/RP19804[/url]) and Delta Faucet RP17453 Tub Spout for Pull-Down Diverter ([url]https://www.amazon.com/Faucet-RP17453-Pull-Down-Diverter-Chrome/dp/B000UB7VQ0[/url]) Thank you for any and all help!