How do I remove this faucet?


  #1  
Old 12-26-18, 04:17 PM
M
Member
Thread Starter
Join Date: Apr 2014
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
How do I remove this faucet?

Replacing my old kitchen faucet, and I can for the life of me not figure out how to remove the old mount.
The metal part in the picture had two bolts that I removed, but that is it. There is nothing left that is shaped as a nut!!

Help!!
 
Attached Images  
  #2  
Old 12-26-18, 04:39 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 70,986
Received 3,176 Likes on 2,852 Posts
That is not a typical faucet. I'm going to guess a designer faucet.
Did the two bolts hold the faucet it ?
Possibly those pieces are threaded together.
 
  #3  
Old 12-26-18, 06:28 PM
lawrosa's Avatar
Super Moderator
Join Date: Dec 2010
Location: Galivants Ferry SC USA
Posts: 18,183
Received 77 Likes on 69 Posts
That piece should unscrew
 
  #4  
Old 12-26-18, 07:05 PM
B
Member
Join Date: Oct 2015
Location: Ct.,USA
Posts: 2,763
Received 208 Likes on 184 Posts
As Lawrosa said, the disc from which the 2 screws were removed has threads on its ID and unthreads from the faucet body below the sink. If you can't unscrew disc by hand (counter clockwise looking up at disc), put nuts on the removed screws and thread in to the disc( thichness of disc). Tighten nuts to disc and use screws as points to apply pressure to unscrew disc from faucet body. Pull out faucet from top.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: