Hey guys, we have a Moen shower faucet which started leaking and we replaced with original cartridge from Home Depot which looks exactly the same but after installing cartridge not getting hot water like before changing. My question is this, if I should get a cartridge from Moen directly, will that make a difference or should I change the shower body please?

A family member has this fiberglass utility sink in their laundry room (please see pics). They said is freely moves back/forth and sideways. Water was leaking every time they use the sink. It was literally just "dropped in" and not clamped.to the counter in any way. The only thing that was trying to hold it in place was the drain connection! There were no mounting holes at the corners, no J or U channels underneath and no clamps or clips on the under-side. The only identification I could find is this number printed on the tub L010515-A16. A Google search on this number did not come up with anything. Sink is 22"x25", counter hole is 19-3/4"x22-3/4". Looking for advice on how to clamp this. Thank you in advance. [img]https://cimg4.ibsrv.net/gimg/www.doityourselft.com-vbulletin/448x336/img_2399_web_small_bd9499e5ff644f459cbe9865ef85a0491b53187e.jpg[/img] [img]https://cimg8.ibsrv.net/gimg/www.doityourselft.com-vbulletin/336x448/img_2395_web_small_9da88e4153bac5f30f083815916b21bd00419f15.jpg[/img] [img]https://cimg9.ibsrv.net/gimg/www.doityourselft.com-vbulletin/336x448/img_2405_web_small_6161962e0e25d4f6df2abfa328a21ea880f9b4a5.jpg[/img]