Cut linoleum flooring repair options


  #1  
Old 09-03-23, 01:26 PM
B
Member
Thread Starter
Join Date: Feb 2009
Location: United States
Posts: 58
Received 1 Upvote on 1 Post
Cut linoleum flooring repair options

Hello!

I cut about a foot or so into our rolled linoleum flooring (see photo).

I'm look for a liquid vinyl that I could fill in the slice.

I know it will still be noticeable. Does something like that exist?

I do not have any extra flooring material to splice in.

Thanks!

 
  #2  
Old 09-04-23, 05:53 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 26,663
Received 1,810 Upvotes on 1,628 Posts
If you are looking for a liquid you could use a product like this, but its not going to make it look any better... but it may help prevent it from catching dust and debris or from catching on something and getting worse.

The product above is not quick drying, it will take about 7 days to cure. So if you decide to use it you nay want to protect the area by covering it with a bucket or something so that no one steps in it or to prevent it from collecting lint, dust, pet hair, etc.
 
  #3  
Old 09-04-23, 07:07 AM
sam floor's Avatar
Forum Topic Moderator
Join Date: May 2010
Location: floor installer
Posts: 992
Received 31 Upvotes on 26 Posts
Go to a flooring store. Buy a very small container of flooring multi-purpose adhesive. Use a paint stir stick or anything thin and put some adhesive under where it is lifting and then put some weight on it for 24 hours. Wipe off any excess with a damp rag before you weight it down. Also buy some vinyl seam sealer to fill the gap while you are at the flooring store. Put it in the crack after the adhesive dries. Don't worry about getting too much on, the extra will wear off with foot traffic. This is for regular vinyl.
If you have one of the vinyl-backed vinyls (the backing will be really shiny) you need a different adhesive made for it. But the repair process is the same.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: